On Thu, Aug 05, 2021 at 07:52:24AM +0200, Ahmad Fatoum wrote:
> Hello Oleksij,
>
> On 05.08.21 06:37, Oleksij Rempel wrote:
> > From: Sam Ravnborg <s...@ravnborg.org>
> >
> > The Multi Innotechnology is a 10.1" 1280x800 panel.
> >
> > The datasheet did not specify specific values for sync, back, front porch.
> > The values are a best guess based on values for similar panels.
> >
> > Co-Developed-by: Sam Ravnborg <s...@ravnborg.org>
> > Co-Developed-by: Ulrich Ölmann <u.oelm...@pengutronix.de>
> > Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> > Signed-off-by: Ulrich Ölmann <u.oelm...@pengutronix.de>
> > Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++
> > 1 file changed, 34 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 21939d4352cf..fda79a986d12 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -3033,6 +3033,37 @@ static const struct panel_desc mitsubishi_aa070mc01
> > = {
> > .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> > };
> >
> > +static const struct display_timing multi_inno_mi1010ait_1cp_timing = {
> > + .pixelclock = { 68900000, 70000000, 73400000 },
> > + .hactive = { 1280, 1280, 1280 },
> > + .hfront_porch = { 30, 60, 71 },
> > + .hback_porch = { 30, 60, 71 },
> > + .hsync_len = { 10, 10, 48 },
> > + .vactive = { 800, 800, 800 },
> > + .vfront_porch = { 5, 10, 10 },
> > + .vback_porch = { 5, 10, 10 },
> > + .vsync_len = { 5, 6, 13 },
> > + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
> > + DISPLAY_FLAGS_DE_HIGH,
> > +};
>
> Here you specify DISPLAY_FLAGS_DE_HIGH.
>
> > +
> > +static const struct panel_desc multi_inno_mi1010ait_1cp = {
> > + .timings = &multi_inno_mi1010ait_1cp_timing,
> > + .num_timings = 1,
> > + .bpc = 8,
> > + .size = {
> > + .width = 217,
> > + .height = 136,
> > + },
> > + .delay = {
> > + .enable = 50,
> > + .disable = 50,
> > + },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> > + .bus_flags = DRM_BUS_FLAG_DE_HIGH,
>
> And here DRM_BUS_FLAG_DE_HIGH. I see that some other panels do this too
> and some only specify one of them. Do you know if they are redundant
> or one of them is ignored?
Hmm... there is a drm_bus_flags_from_videomode():
if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
*bus_flags |= DRM_BUS_FLAG_DE_HIGH;
It looks like for DPI panel it would be set automatically. This
function is not execute in case of LVDS panel.
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
