Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.

Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts 
b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index eff7c6447087..aaf44ab256a1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -146,6 +146,18 @@ refhdmi: refhdmi {
                #clock-cells = <0>;
                clock-frequency = <114285000>;
        };
+
+       dpcon {
+               compatible = "dp-connector";
+               label = "P11";
+               type = "full-size";
+
+               port {
+                       dpcon_in: endpoint {
+                               remote-endpoint = <&dpsub_dp_out>;
+                       };
+               };
+       };
 };
 
 &can1 {
@@ -165,6 +177,14 @@ &zynqmp_dpsub {
        phy-names = "dp-phy0", "dp-phy1";
        phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
               <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+       ports {
+               port@5 {
+                       dpsub_dp_out: endpoint {
+                               remote-endpoint = <&dpcon_in>;
+                       };
+               };
+       };
 };
 
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
-- 
Regards,

Laurent Pinchart

Reply via email to