Replace the direct i2c access (i2c_smbus_* functions) with regmap APIs,
which will simplify the future update on ps8640 driver.

Signed-off-by: Philip Chen <philipc...@chromium.org>
---

 drivers/gpu/drm/bridge/parade-ps8640.c | 66 +++++++++++++++-----------
 1 file changed, 39 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c 
b/drivers/gpu/drm/bridge/parade-ps8640.c
index 685e9c38b2db..a16725dbf912 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -9,6 +9,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of_graph.h>
+#include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
 #include <drm/drm_bridge.h>
@@ -64,12 +65,29 @@ struct ps8640 {
        struct drm_bridge *panel_bridge;
        struct mipi_dsi_device *dsi;
        struct i2c_client *page[MAX_DEVS];
+       struct regmap   *regmap[MAX_DEVS];
        struct regulator_bulk_data supplies[2];
        struct gpio_desc *gpio_reset;
        struct gpio_desc *gpio_powerdown;
        bool powered;
 };
 
+static const struct regmap_range ps8640_volatile_ranges[] = {
+       { .range_min = 0, .range_max = 0xff },
+};
+
+static const struct regmap_access_table ps8640_volatile_table = {
+       .yes_ranges = ps8640_volatile_ranges,
+       .n_yes_ranges = ARRAY_SIZE(ps8640_volatile_ranges),
+};
+
+static const struct regmap_config ps8640_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .volatile_table = &ps8640_volatile_table,
+       .cache_type = REGCACHE_NONE,
+};
+
 static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
 {
        return container_of(e, struct ps8640, bridge);
@@ -78,13 +96,13 @@ static inline struct ps8640 *bridge_to_ps8640(struct 
drm_bridge *e)
 static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
                                     const enum ps8640_vdo_control ctrl)
 {
-       struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
-       u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl };
+       struct regmap *map = ps_bridge->regmap[PAGE3_DSI_CNTL1];
+       u8 vdo_ctrl_buf[] = {VDO_CTL_ADD, ctrl};
        int ret;
 
-       ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
-                                            sizeof(vdo_ctrl_buf),
-                                            vdo_ctrl_buf);
+       ret = regmap_bulk_write(map, PAGE3_SET_ADD,
+                               vdo_ctrl_buf, sizeof(vdo_ctrl_buf));
+
        if (ret < 0) {
                DRM_ERROR("failed to %sable VDO: %d\n",
                          ctrl == ENABLE ? "en" : "dis", ret);
@@ -96,8 +114,7 @@ static int ps8640_bridge_vdo_control(struct ps8640 
*ps_bridge,
 
 static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
 {
-       struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
-       unsigned long timeout;
+       struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL];
        int ret, status;
 
        if (ps_bridge->powered)
@@ -121,18 +138,12 @@ static void ps8640_bridge_poweron(struct ps8640 
*ps_bridge)
         */
        msleep(200);
 
-       timeout = jiffies + msecs_to_jiffies(200) + 1;
+       ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status,
+                       status & PS_GPIO9, 20 * 1000, 200 * 1000);
 
-       while (time_is_after_jiffies(timeout)) {
-               status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H);
-               if (status < 0) {
-                       DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status);
-                       goto err_regulators_disable;
-               }
-               if ((status & PS_GPIO9) == PS_GPIO9)
-                       break;
-
-               msleep(20);
+       if (ret < 0) {
+               DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", ret);
+               goto err_regulators_disable;
        }
 
        msleep(50);
@@ -144,22 +155,15 @@ static void ps8640_bridge_poweron(struct ps8640 
*ps_bridge)
         * disabled by the manufacturer. Once disabled, all MCS commands are
         * ignored by the display interface.
         */
-       status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN);
-       if (status < 0) {
-               DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status);
-               goto err_regulators_disable;
-       }
 
-       ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN,
-                                       status & ~MCS_EN);
+       ret = regmap_update_bits(map, PAGE2_MCS_EN, MCS_EN, 0);
        if (ret < 0) {
                DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret);
                goto err_regulators_disable;
        }
 
        /* Switch access edp panel's edid through i2c */
-       ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
-                                       I2C_BYPASS_EN);
+       ret = regmap_write(map, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
        if (ret < 0) {
                DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret);
                goto err_regulators_disable;
@@ -361,6 +365,10 @@ static int ps8640_probe(struct i2c_client *client)
        ps_bridge->bridge.type = DRM_MODE_CONNECTOR_eDP;
 
        ps_bridge->page[PAGE0_DP_CNTL] = client;
+       ps_bridge->regmap[PAGE0_DP_CNTL] = devm_regmap_init_i2c(client,
+                                               &ps8640_regmap_config);
+       if (IS_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]))
+               return PTR_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]);
 
        for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) {
                ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev,
@@ -371,6 +379,10 @@ static int ps8640_probe(struct i2c_client *client)
                                client->addr + i);
                        return PTR_ERR(ps_bridge->page[i]);
                }
+               ps_bridge->regmap[i] = devm_regmap_init_i2c(ps_bridge->page[i],
+                                                       &ps8640_regmap_config);
+               if (IS_ERR(ps_bridge->regmap))
+                       return PTR_ERR(ps_bridge->regmap[i]);
        }
 
        i2c_set_clientdata(client, ps_bridge);
-- 
2.33.0.153.gba50c8fa24-goog

Reply via email to