From: "Yipeng Chen (Jasber)" <yipeng.c...@amd.com>
[Why]
Enabled ABM (level != 0) would raise short pluse irq DC_IRQ_SOURCE_HPD1RX
randomly with PSR error LINK_CRC_ERROR. Actually there is no hot plugging
on EDP panel. After correcting CRC error, there is no need to send drm
hotplug event.
[How]
Returning false would skip doing hot-plug when handle_hpd_irq_psr_sink()
handled irq. Hot-plug process causes visible flicking on overlay.
Signed-off-by: Yipeng Chen (Jasber) <yipeng.c...@amd.com>
Reviewed-by: Roman Li <roman...@amd.com>
Anthony Koo <anthony....@amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 1e4794e2825c..9b9fbe5e9bd4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3007,7 +3007,7 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link,
union hpd_irq_data *out_hpd
if (handle_hpd_irq_psr_sink(link))
/* PSR-related error was detected and handled */
- return true;
+ return false;
/* If PSR-related error handled, Main link may be off,
* so do not handle as a normal sink status change interrupt.
--
2.25.1
