On Sun, Oct 24, 2021 at 05:50:10PM +0200, Hans de Goede wrote:
> Add a NO_VLV_DISP_PW_DPIO_CMN_BC_INIT quirk to fix i915 not working on
> the Xiaomi Mi Pad 2 (with CHT x5-Z8500 SoC).
>
> The Xiaomi Mi Pad 2 uses quite an unusual hardware-design for a Cherry
> Trail tablet. It deviates from the typical reference design based tablets
> in many ways.
>
> The Mi Pad 2 does not have any DisplayPort or HDMI outouts. I suspect that
> as part of its unusual design it also has some supply rail which is only
> used for DisplayPort or HDMI not connected.
Do we have the VBT somewhere (preferable attached to a bug report)?
Maybe we can avoid an ugly quirk.
>
> Force-enabling the dpio-common-bc powerwell as the i915 normal does at boot
> appears to cause the P-Unit to hang. When booting with a serial-usb console
> the following errors are logged before the system freezes:
>
> i915 0000:00:02.0: [drm] *ERROR* timeout setting power well state 00000000
> (fffff3ff)
> i915 0000:00:02.0: [drm] *ERROR* Display PHY 0 is not power up
Hmm. I wonder if we're missing a clock or something...
Either of these do anything different?
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -1419,6 +1419,10 @@ static void vlv_display_power_well_init(struct
drm_i915_private *dev_priv)
for_each_pipe(dev_priv, pipe) {
u32 val = intel_de_read(dev_priv, DPLL(pipe));
+ val |= DPLL_SSC_REF_CLK_CHV;
or
+ val &= ~DPLL_SSC_REF_CLK_CHV;
val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (pipe != PIPE_A)
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
--
Ville Syrjälä
Intel
