Add support for initializing the controller from device properties when
the compatible is "sitronix,st7735r".
The rotation property does not apply in this case since a matching
ADDRESS_MODE/madctl value is necessary.
Signed-off-by: Noralf Trønnes <nor...@tronnes.org>
---
drivers/gpu/drm/tiny/st7735r.c | 87 +++++++++++++++++++++++++++++-----
1 file changed, 75 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/tiny/st7735r.c b/drivers/gpu/drm/tiny/st7735r.c
index fc40dd10efa8..7f4d880b8702 100644
--- a/drivers/gpu/drm/tiny/st7735r.c
+++ b/drivers/gpu/drm/tiny/st7735r.c
@@ -58,6 +58,52 @@ struct st7735r_priv {
static void st7735r_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
+{
+ struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+ struct mipi_dbi *dbi = &dbidev->dbi;
+ int ret, idx;
+
+ if (!drm_dev_enter(pipe->crtc.dev, &idx))
+ return;
+
+ DRM_DEBUG_KMS("\n");
+
+ ret = mipi_dbi_poweron_conditional_reset(dbidev);
+ if (ret < 0)
+ goto out_exit;
+ if (ret == 1)
+ goto out_enable;
+
+ mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
+ msleep(120);
+
+ mipi_dbi_command_from_property(dbi, ST7735R_FRMCTR1, "frmctr1", 3);
+ mipi_dbi_command_from_property(dbi, ST7735R_INVCTR, "invctr", 1);
+ mipi_dbi_command_from_property(dbi, ST7735R_PWCTR1, "pwctr1", 3);
+ mipi_dbi_command_from_property(dbi, ST7735R_PWCTR2, "pwctr2", 1);
+ mipi_dbi_command_from_property(dbi, ST7735R_PWCTR3, "pwctr3", 2);
+ mipi_dbi_command_from_property(dbi, ST7735R_VMCTR1, "vmctr1", 1);
+ mipi_dbi_command_from_property(dbi, MIPI_DCS_SET_ADDRESS_MODE,
"madctl", 1);
+ mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT,
MIPI_DCS_PIXEL_FMT_16BIT);
+ mipi_dbi_command_from_property(dbi, ST7735R_GAMCTRP1, "gamctrp1", 16);
+ mipi_dbi_command_from_property(dbi, ST7735R_GAMCTRN1, "gamctrn1", 16);
+
+ mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
+out_enable:
+ mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
+out_exit:
+ drm_dev_exit(idx);
+}
+
+static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = {
+ .enable = st7735r_pipe_enable,
+ .disable = mipi_dbi_pipe_disable,
+ .update = mipi_dbi_pipe_update,
+};
+
+static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv,
@@ -132,8 +178,8 @@ static void st7735r_pipe_enable(struct
drm_simple_display_pipe *pipe,
drm_dev_exit(idx);
}
-static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = {
- .enable = st7735r_pipe_enable,
+static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {
+ .enable = jd_t18003_t01_pipe_enable,
.disable = mipi_dbi_pipe_disable,
.update = mipi_dbi_pipe_update,
};
@@ -168,6 +214,7 @@ static const struct drm_driver st7735r_driver = {
static const struct of_device_id st7735r_of_match[] = {
{ .compatible = "jianda,jd-t18003-t01", .data = &jd_t18003_t01_cfg },
{ .compatible = "okaya,rh128128t", .data = &rh128128t_cfg },
+ { .compatible = "sitronix,st7735r" },
{ },
};
MODULE_DEVICE_TABLE(of, st7735r_of_match);
@@ -180,6 +227,9 @@ MODULE_DEVICE_TABLE(spi, st7735r_id);
static int st7735r_probe(struct spi_device *spi)
{
+ const struct drm_simple_display_pipe_funcs *funcs;
+ const struct drm_display_mode *mode;
+ struct drm_display_mode dt_mode;
struct device *dev = &spi->dev;
const struct st7735r_cfg *cfg;
struct mipi_dbi_dev *dbidev;
@@ -191,8 +241,12 @@ static int st7735r_probe(struct spi_device *spi)
int ret;
cfg = device_get_match_data(&spi->dev);
- if (!cfg)
- cfg = (void *)spi_get_device_id(spi)->driver_data;
+ if (!cfg) {
+ const struct spi_device_id *spi_id = spi_get_device_id(spi);
+
+ if (spi_id)
+ cfg = (struct st7735r_cfg *)spi_id->driver_data;
+ }
priv = devm_drm_dev_alloc(dev, &st7735r_driver,
struct st7735r_priv, dbidev.drm);
@@ -217,20 +271,29 @@ static int st7735r_probe(struct spi_device *spi)
if (IS_ERR(dbidev->backlight))
return PTR_ERR(dbidev->backlight);
- device_property_read_u32(dev, "rotation", &rotation);
-
ret = mipi_dbi_spi_init(spi, dbi, dc);
if (ret)
return ret;
- if (cfg->write_only)
- dbi->read_commands = NULL;
+ if (cfg) {
+ device_property_read_u32(dev, "rotation", &rotation);
- dbidev->left_offset = cfg->left_offset;
- dbidev->top_offset = cfg->top_offset;
+ mode = &cfg->mode;
+ funcs = &jd_t18003_t01_pipe_funcs;
+ dbidev->left_offset = cfg->left_offset;
+ dbidev->top_offset = cfg->top_offset;
+ } else {
+ ret = mipi_dbi_read_device_properties(dbidev, &dt_mode);
+ if (ret)
+ return ret;
- ret = mipi_dbi_dev_init(dbidev, &st7735r_pipe_funcs, &cfg->mode,
- rotation);
+ mode = &dt_mode;
+ funcs = &st7735r_pipe_funcs;
+ }
+
+ mipi_dbi_set_writeonly(dbi, cfg ? cfg->write_only : false);
+
+ ret = mipi_dbi_dev_init(dbidev, funcs, mode, rotation);
if (ret)
return ret;
--
2.33.0
