Some platforms that can be supported this driver has additional clock
source selection bits in VIDCON0 register that allows to select which
clock should be used to drive the pixel clock: bus clock or special
clock.

Since this driver assumes that special clock always drives the pixel
clock, this patch sets the selection bitfield to use the special clock.

Signed-off-by: Tomasz Figa <tomasz.f...@gmail.com>
---
 drivers/gpu/drm/exynos/exynos_drm_fimd.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c 
b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index a5559f6..a2e385d 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -65,6 +65,7 @@ struct fimd_driver_data {
        unsigned int timing_base;
 
        unsigned int has_shadowcon:1;
+       unsigned int has_clksel:1;
 };
 
 static struct fimd_driver_data exynos4_fimd_driver_data = {
@@ -278,6 +279,11 @@ static void fimd_commit(struct device *dev)
        val = ctx->vidcon0;
        val &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
 
+       if (ctx->driver_data->has_clksel) {
+               val &= ~VIDCON0_CLKSEL_MASK;
+               val |= VIDCON0_CLKSEL_LCD;
+       }
+
        if (ctx->clkdiv > 1)
                val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
        else
-- 
1.8.2.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to