Convert mdp4 binding into yaml format. Signed-off-by: David Heidelberg <da...@ixit.cz> --- .../devicetree/bindings/display/msm/mdp4.txt | 114 ---------------- .../devicetree/bindings/display/msm/mdp4.yaml | 124 ++++++++++++++++++ 2 files changed, 124 insertions(+), 114 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.txt create mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt deleted file mode 100644 index b07eeb38f709..000000000000 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ /dev/null @@ -1,114 +0,0 @@ -Qualcomm adreno/snapdragon MDP4 display controller - -Description: - -This is the bindings documentation for the MDP4 display controller found in -SoCs like MSM8960, APQ8064 and MSM8660. - -Required properties: -- compatible: - * "qcom,mdp4" - mdp4 -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the display controller. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "core_clk" - * "iface_clk" - * "bus_clk" - * "lut_clk" - * "hdmi_clk" - * "tv_clk" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The output port mappings are: - Port 0 -> LCDC/LVDS - Port 1 -> DSI1 Cmd/Video - Port 2 -> DSI2 Cmd/Video - Port 3 -> DTV - -Optional properties: -- clock-names: the following clocks are optional: - * "lut_clk" -- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be - used for LCDC. This is only valid for 18bpp panels. - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - ... - ports { - ... - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; - ... - }; - ... - }; - - ... - - mdp: mdp@5100000 { - compatible = "qcom,mdp4"; - reg = <0x05100000 0xf0000>; - interrupts = <GIC_SPI 75 0>; - clock-names = - "core_clk", - "iface_clk", - "lut_clk", - "hdmi_clk", - "tv_clk"; - clocks = - <&mmcc MDP_CLK>, - <&mmcc MDP_AHB_CLK>, - <&mmcc MDP_AXI_CLK>, - <&mmcc MDP_LUT_CLK>, - <&mmcc HDMI_TV_CLK>, - <&mmcc MDP_TV_CLK>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp_lvds_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - mdp_dsi1_out: endpoint { - }; - }; - - port@2 { - reg = <2>; - mdp_dsi2_out: endpoint { - }; - }; - - port@3 { - reg = <3>; - mdp_dtv_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml new file mode 100644 index 000000000000..f63f60fea27c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon MDP4 display controller + +description: > + MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660. + +maintainers: + - Rob Clark <robdcl...@gmail.com> + +properties: + compatible: + const: qcom,mdp4 + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core_clk + - const: iface_clk + - const: bus_clk + - const: lut_clk + - const: hdmi_clk + - const: tv_clk + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: LCDC/LVDS + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI1 Cmd / Video + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DSI2 Cmd / Video + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Digital TV + + qcom,lcdc-align-lsb: + type: boolean + description: > + Indication that LSB alignment should be used for LCDC. + This is only valid for 18bpp panels. + +required: + - compatible + - reg + - clocks + - ports + +additionalProperties: false + +examples: + - | + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <0 75 0>; + clock-names = + "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc 77>, + <&mmcc 86>, + <&mmcc 102>, + <&mmcc 75>, + <&mmcc 97>, + <&mmcc 12>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; -- 2.34.1