On Tue, Jan 11, 2022 at 09:21:51PM +0100, Tommaso Merciai wrote:
> On Sun, Jan 09, 2022 at 03:44:07PM -0300, Fabio Estevam wrote:
> > Hi Tommaso,
> >
> > On Sat, Jan 8, 2022 at 4:17 PM Tommaso Merciai <tomm.merc...@gmail.com>
> > wrote:
> >
> > > Hi Fabio,
> > > If you need some test let me know. Whitch filesystem are you using?
> >
> > I am using a rootfs generated by Buildroot.
> >
> > The issue I see seems to be hotplug-related.
> >
> > cat /sys/class/drm/card1-HDMI-A-1/status
> >
> > not always match with the real state of the HDMI cable.
> >
> > > In the next days I will investigate on this issue.
> > > Let me know.
> >
> > Thanks
>
> Hi Fabio,
> Got it, I'll try to reproduce the issue on my side and let you know.
>
> Thanks,
> Tommaso
Hi Fabio,
I'm working on bring up urt,umsh-8596md-20t lvds kit panel, but after enable
following node I get the following error:
+ backlight_display: backlight-display {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <32>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -70,6 +77,17 @@ reg_wlan: regulator-wlan {
startup-delay-us = <70000>;
enable-active-high;
};
+
+ panel {
+ compatible = "urt,umsh-8596md-20t";
+ backlight = <&backlight_display>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&fec1 {
@@ -196,6 +214,12 @@ pinctrl_bt_reg: btreggrp {
<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x15059>;
};
+ pinctrl_pwm4: pwm4grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x110b0
+ >;
+ };
+
pinctrl_enet1: enet1grp {
fsl,pins =
<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
@@ -316,6 +340,40 @@ pinctrl_usdhc3: usdhc3grp {
<MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10069>,
<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x10059>;
};
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
};
&uart1 {
@@ -408,3 +466,22 @@ wlcore: wlcore@2 {
tcxo-clock-frequency = <26000000>;
};
};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm4 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
Error:
imx6qpdlsolox login: [ 49.624735] ------------[ cut here ]------------
[ 49.625348] WARNING: CPU: 0 PID: 324 at
drivers/gpu/drm/drm_atomic_helper.c:1529
drm_atomic_helper_wait_for_vblanks.part.0+0x278/0x290
[ 49.625527] [CRTC:35:crtc-0] vblank wait timed out
[ 49.625590] Modules linked in: imx_sdma
[ 49.625755] CPU: 0 PID: 324 Comm: systemd-logind Not tainted
5.16.0-08197-gfeb7a43de5ef-dirty #62
[ 49.625829] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[ 49.625883] unwind_backtrace from show_stack+0x10/0x14
[ 49.625998] show_stack from dump_stack_lvl+0x58/0x70
[ 49.626093] dump_stack_lvl from __warn+0xd4/0x154
[ 49.626180] __warn from warn_slowpath_fmt+0x74/0xa8
[ 49.626286] warn_slowpath_fmt from
drm_atomic_helper_wait_for_vblanks.part.0+0x278/0x290
[ 49.626395] drm_atomic_helper_wait_for_vblanks.part.0 from
drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
[ 49.626498] drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
[ 49.626591] commit_tail from drm_atomic_helper_commit+0x158/0x18c
[ 49.626680] drm_atomic_helper_commit from
drm_client_modeset_commit_atomic+0x238/0x284
[ 49.626784] drm_client_modeset_commit_atomic from
drm_client_modeset_commit_locked+0x60/0x1cc
[ 49.626868] drm_client_modeset_commit_locked from
drm_fb_helper_pan_display+0x94/0x1c4
[ 49.626970] drm_fb_helper_pan_display from fb_pan_display+0x9c/0x114
[ 49.627051] fb_pan_display from bit_update_start+0x14/0x30
[ 49.627146] bit_update_start from fbcon_switch+0x2d4/0x45c
[ 49.627236] fbcon_switch from redraw_screen+0xd4/0x248
[ 49.627338] redraw_screen from fbcon_blank+0x1b0/0x258
[ 49.627424] fbcon_blank from do_unblank_screen+0x98/0x170
[ 49.627509] do_unblank_screen from vt_ioctl+0x960/0x1d78
[ 49.627623] vt_ioctl from tty_ioctl+0x3e0/0xe18
[ 49.627709] tty_ioctl from sys_ioctl+0x5a8/0xec4
[ 49.627796] sys_ioctl from ret_fast_syscall+0x0/0x1c
[ 49.627874] Exception stack(0xc4767fa8 to 0xc4767ff0)
[ 49.627943] 7fa0: 021e1600 fffffffb 0000000a 00004b3a
00000000 00000134
[ 49.628010] 7fc0: 021e1600 fffffffb 0000000a 00000036 be8479d8 00000000
00000000 021d43b8
[ 49.628061] 7fe0: b6f0f978 be847914 b6e41d75 b6cbfc18
[ 49.628114] irq event stamp: 52041
[ 49.628170] hardirqs last enabled at (52047): [<c019b5d0>]
vprintk_emit+0x2dc/0x310
[ 49.628285] hardirqs last disabled at (52052): [<c019b57c>]
vprintk_emit+0x288/0x310
[ 49.628377] softirqs last enabled at (51264): [<c0101518>]
__do_softirq+0x2f8/0x5b0
[ 49.628466] softirqs last disabled at (51231): [<c012eda8>]
__irq_exit_rcu+0x16c/0x1e0
[ 49.628573] ---[ end trace 1572e4d782184e68 ]---
imx6qpdlsolox login: root
[ 60.016074] mxsfb 2220000.lcdif: [drm] *ERROR* flip_done timed out
[ 60.016455] mxsfb 2220000.lcdif: [drm] *ERROR* [CRTC:35:crtc-0] commit wait
timed out
[ 70.256588] mxsfb 2220000.lcdif: [drm] *ERROR* flip_done timed out
[ 70.256695] mxsfb 2220000.lcdif: [drm] *ERROR* [CONNECTOR:37:DPI-1] commit
wait timed out
[ 80.495783] mxsfb 2220000.lcdif: [drm] *ERROR* flip_done timed out
[ 80.495889] mxsfb 2220000.lcdif: [drm] *ERROR* [PLANE:31:plane-0] commit
wait timed out
[ 80.606207] ------------[ cut here ]------------
[ 80.606257] WARNING: CPU: 0 PID: 1 at
drivers/gpu/drm/drm_atomic_helper.c:1529
drm_atomic_helper_wait_for_vblanks.part.0+0x278/0x290
[ 80.606350] [CRTC:35:crtc-0] vblank wait timed out
[ 80.606386] Modules linked in: imx_sdma
[ 80.606484] CPU: 0 PID: 1 Comm: systemd Tainted: G W
5.16.0-08197-gfeb7a43de5ef-dirty #62
[ 80.606520] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[ 80.606551] unwind_backtrace from show_stack+0x10/0x14
[ 80.606614] show_stack from dump_stack_lvl+0x58/0x70
[ 80.606665] dump_stack_lvl from __warn+0xd4/0x154
[ 80.606710] __warn from warn_slowpath_fmt+0x74/0xa8
[ 80.606769] warn_slowpath_fmt from
drm_atomic_helper_wait_for_vblanks.part.0+0x278/0x290
[ 80.606829] drm_atomic_helper_wait_for_vblanks.part.0 from
drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
[ 80.606884] drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
[ 80.606933] commit_tail from drm_atomic_helper_commit+0x158/0x18c
[ 80.606979] drm_atomic_helper_commit from
drm_client_modeset_commit_atomic+0x238/0x284
[ 80.607034] drm_client_modeset_commit_atomic from
drm_client_modeset_commit_locked+0x60/0x1cc
[ 80.607078] drm_client_modeset_commit_locked from
drm_fb_helper_pan_display+0x94/0x1c4
[ 80.607131] drm_fb_helper_pan_display from fb_pan_display+0x9c/0x114
[ 80.607176] fb_pan_display from bit_update_start+0x14/0x30
[ 80.607225] bit_update_start from fbcon_switch+0x2d4/0x45c
[ 80.607270] fbcon_switch from csi_J+0x278/0x298
[ 80.607323] csi_J from do_con_write+0x1f10/0x20e8
[ 80.607371] do_con_write from con_write+0xc/0x20
[ 80.607419] con_write from n_tty_write+0x1e4/0x4cc
[ 80.607467] n_tty_write from file_tty_write.constprop.0+0x148/0x2c4
[ 80.607527] file_tty_write.constprop.0 from vfs_write+0x2ec/0x57c
[ 80.607594] vfs_write from ksys_write+0x60/0xec
[ 80.607643] ksys_write from ret_fast_syscall+0x0/0x1c
[ 80.607688] Exception stack(0xc40d5fa8 to 0xc40d5ff0)
[ 80.607724] 5fa0: 0000000a b6f62404 00000017 b6f62404
0000000a 00000000
[ 80.607758] 5fc0: 0000000a b6f62404 b6aa1a60 00000004 00000004 00989cc8
0096f040 00000000
[ 80.607786] 5fe0: 00000004 be81b9a0 b6d371ff b6d39096
[ 80.607816] irq event stamp: 629899
[ 80.607850] hardirqs last enabled at (629905): [<c019b5d0>]
vprintk_emit+0x2dc/0x310
[ 80.607913] hardirqs last disabled at (629910): [<c019b57c>]
vprintk_emit+0x288/0x310
[ 80.607964] softirqs last enabled at (629482): [<c0101518>]
__do_softirq+0x2f8/0x5b0
[ 80.608015] softirqs last disabled at (629431): [<c012eda8>]
__irq_exit_rcu+0x16c/0x1e0
[ 80.608077] ---[ end trace 1572e4d782184e69 ]---
I'm working using NXP fs, from 5.10.72 2.2.0 release.
Any suggestion? Maybe some problem on lcdif node?
I take as reference imx6sx-sdb.dtsi
Let me know.
Thanks,
Tommaso
