Add binding for MIPI DBI compatible SPI panels. v2: - Fix path for panel-common.yaml - Use unevaluatedProperties - Drop properties which are in the allOf section - Drop model property (Rob)
Signed-off-by: Noralf Trønnes <nor...@tronnes.org> --- .../display/panel/panel-mipi-dbi-spi.yaml | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml new file mode 100644 index 000000000000..b7cbeea0f8aa --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPI DBI SPI Panels Device Tree Bindings + +maintainers: + - Noralf Trønnes <nor...@tronnes.org> + +description: + This binding is for display panels using a MIPI DBI controller + in SPI mode. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: panel-mipi-dbi-spi + + write-only: + type: boolean + description: + Controller is not readable (ie. MISO is not wired up). + + dc-gpios: + maxItems: 1 + description: | + Controller data/command selection (D/CX) in 4-line SPI mode. + If not set, the controller is in 3-line SPI mode. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "panel-mipi-dbi-spi"; + reg = <0>; + spi-max-frequency = <40000000>; + dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + write-only; + }; + }; + +... -- 2.33.0
