From: Robin van der Gracht <ro...@protonic.nl>

Signed-off-by: Robin van der Gracht <ro...@protonic.nl>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 42 +++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts 
b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index be7c4cb339e7..baaa6ffc4df9 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -171,6 +172,18 @@ panel_in: endpoint {
                };
        };
 
+       connector {
+               compatible = "composite-video-connector";
+               label = "Composite0";
+               sdtv-standards = <SDTV_STD_PAL_B>;
+
+               port {
+                       comp0_out: endpoint {
+                               remote-endpoint = <&tvp5150_comp0_in>;
+                       };
+               };
+       };
+
        reg_bl_12v0: regulator-bl-12v0 {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -295,6 +308,31 @@ sgtl5000: audio-codec@a {
                VDDIO-supply = <&reg_3v3>;
                VDDD-supply = <&reg_1v8>;
        };
+
+       video@5c {
+               compatible = "ti,tvp5150";
+               reg = <0x5c>;
+
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+
+                       tvp5150_comp0_in: endpoint {
+                               remote-endpoint = <&comp0_out>;
+                       };
+               };
+
+               /* Output port 2 is video output pad */
+               port@2 {
+                       reg = <2>;
+
+                       tvp5151_to_ipu1_csi0_mux: endpoint {
+                               remote-endpoint = 
<&ipu1_csi0_mux_from_parallel_sensor>;
+                       };
+               };
+       };
 };
 
 &i2c3 {
@@ -322,6 +360,10 @@ &ipu1_di0_disp0 {
        remote-endpoint = <&display_in>;
 };
 
+&ipu1_csi0_mux_from_parallel_sensor {
+       remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
 &pwm1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm1>;
-- 
2.30.2

Reply via email to