[PATCH v1 1/8] ARM: dts: imx6qdl-vicut1/vicutgo: Set default backlight brightness to maximum

[Oleksij Rempel]

From: David Jander <da...@protonic.nl>

Recover default behavior of the device and set maximal brightness

Signed-off-by: David Jander <da...@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-victgo.dts   | 2 +-
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts 
b/arch/arm/boot/dts/imx6dl-victgo.dts
index 227c952543d4..e6134efbfabd 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -28,7 +28,7 @@ backlight: backlight {
                pwms = <&pwm1 0 5000000 0>;
                brightness-levels = <0 16 64 255>;
                num-interpolated-steps = <16>;
-               default-brightness-level = <1>;
+               default-brightness-level = <48>;
                power-supply = <&reg_3v3>;
                enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
        };
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi 
b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index 1ac7e13249d2..c1d06bc28c67 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -23,7 +23,7 @@ backlight: backlight {
                pwms = <&pwm1 0 5000000 0>;
                brightness-levels = <0 16 64 255>;
                num-interpolated-steps = <16>;
-               default-brightness-level = <1>;
+               default-brightness-level = <48>;
                power-supply = <&reg_3v3>;
                enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
        };
-- 
2.30.2