[PATCH v7 19/24] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---

Notes:
    Changes since v5:
    - Drop reg property from single endpoint node
    
    Changes since v4:
    - Sort nodes alphabetically
    
    Changes since v3:
    - Fix HDMI connector type

 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts 
b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416af..792735d424716 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
                regulator-max-microvolt = <12000000>;
        };
 
+       hdmi-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        vcc3v3_sys: vcc3v3-sys {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3_sys";
@@ -106,6 +118,24 @@ &gmac1m1_rgmii_clk
        status = "okay";
 };
 
+&hdmi {
+       avdd-0v9-supply = <&vdda0v9_image>;
+       avdd-1v8-supply = <&vcca1v8_image>;
+       status = "okay";
+};
+
+&hdmi_in {
+       hdmi_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi>;
+       };
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        status = "okay";
 
@@ -390,3 +420,20 @@ &sdmmc0 {
 &uart2 {
        status = "okay";
 };
+
+&vop {
+       assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+       assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi_in_vp0>;
+       };
+};
-- 
2.30.2