The DSI burst mode is more energy efficient than the DSI sync pulse mode,
make use of the burst mode since the chip supports it as well. Disable the
generation of EoT packet, the chip ignores it, so no point in emitting it.
Enable transmission of data in LP mode, otherwise register read via DSI
does not work with this chip.
Acked-by: Maxime Ripard <max...@cerno.tech>
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Jagan Teki <ja...@amarulasolutions.com>
Cc: Maxime Ripard <max...@cerno.tech>
Cc: Robert Foss <robert.f...@linaro.org>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: Thomas Zimmermann <tzimmerm...@suse.de>
To: dri-devel@lists.freedesktop.org
---
V2: Rebase on next-20220214
V3: Add AB from Maxime
---
drivers/gpu/drm/bridge/chipone-icn6211.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c
b/drivers/gpu/drm/bridge/chipone-icn6211.c
index 71c83a18984fa..b4e886c2b92a5 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -503,7 +503,8 @@ static int chipone_probe(struct mipi_dsi_device *dsi)
dsi->lanes = icn->dsi_lanes;
dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
--
2.34.1
