Hello,

This series adds a ssd130x-spi driver that provides a 4-wire SPI transport
support for SSD130x OLED controllers that can be accessed through a SPI.

The driver is quite similar to existing ssd130x-i2c driver that is used by
I2C controllers, but there is a difference in the protocol used by SSD130x
depending on the transport used. The details are in patch #4 description.

Patch #1 just makes the current ssd130x-i2c compatible strings in the DT
binding to be deprecated, and add new ones that don't have an -fb suffix.

Patch #2 extends the DT binding with the compatible string and properties
needed to support the ssd130x-spi devices.

Patch #3 adds the new compatible strings to the OF device ID table in the
ssd130x-i2c DRM driver.

Patch #4 moves the device info for the different SSD130x variants from
the ssd130x-i2c transport driver to the ssd130x core driver.

Finally patch #5 adds the ssd130x-spi DRM driver for the OLED controllers
that come with a 4-wire SPI interface, instead of an I2C interface.

Best regards,
Javier


Javier Martinez Canillas (5):
  dt-bindings: display: ssd1307fb: Deprecate fbdev compatible strings
  dt-bindings: display: ssd1307fb: Extend schema for SPI controllers
  drm/solomon: Add ssd130x-i2c compatible strings without an -fb suffix
  drm/solomon: Move device info from ssd130x-i2c to the core driver
  drm/solomon: Add SSD130x OLED displays SPI support

 .../bindings/display/solomon,ssd1307fb.yaml   | 117 ++++++++---
 drivers/gpu/drm/solomon/Kconfig               |   9 +
 drivers/gpu/drm/solomon/Makefile              |   1 +
 drivers/gpu/drm/solomon/ssd130x-i2c.c         |  60 +++---
 drivers/gpu/drm/solomon/ssd130x-spi.c         | 184 ++++++++++++++++++
 drivers/gpu/drm/solomon/ssd130x.c             |  60 +++++-
 drivers/gpu/drm/solomon/ssd130x.h             |  13 ++
 7 files changed, 376 insertions(+), 68 deletions(-)
 create mode 100644 drivers/gpu/drm/solomon/ssd130x-spi.c

-- 
2.35.1

Reply via email to