On Wed, 2022-04-20 at 13:00 +0530, Vinod Koul wrote: > On 19-04-22, 09:08, Liu Ying wrote: > > Hi, > > > > This is the v8 series to add i.MX8qxp LVDS PHY mode support for the > > Mixel > > PHY in the Freescale i.MX8qxp SoC. > > > > The Mixel PHY is MIPI DPHY + LVDS PHY combo, which can works in > > either > > MIPI DPHY mode or LVDS PHY mode. The PHY mode is controlled by > > i.MX8qxp > > SCU firmware. The PHY driver would call a SCU function to > > configure the > > mode. > > > > The PHY driver is already supporting the Mixel MIPI DPHY in i.MX8mq > > SoC, > > where it appears to be a single MIPI DPHY. > > > > > > Patch 1/5 sets PHY mode in the Northwest Logic MIPI DSI host > > controller > > bridge driver, since i.MX8qxp SoC embeds this controller IP to > > support > > MIPI DSI displays together with the Mixel PHY. > > > > Patch 2/5 allows LVDS PHYs to be configured through the generic PHY > > functions > > and through a custom structure added to the generic PHY > > configuration union. > > > > Patch 3/5 converts mixel,mipi-dsi-phy plain text dt binding to > > json-schema. > > > > Patch 4/5 adds dt binding support for the Mixel combo PHY in > > i.MX8qxp SoC. > > > > Patch 5/5 adds the i.MX8qxp LVDS PHY mode support in the Mixel PHY > > driver. > > Applied patch 2-5 to phy-next, thanks
Now that patch 2-5 landed in phy-next, patch 1 is needed to explicitly set MIPI DPHY mode in the nwl-dsi drm bridge driver, otherwise, i.MX8mq MIPI DSI display feature will be broken due to the phy mode check added in patch 5. I'm assuming patch 1 should go through drm-misc. Robert/drm folks, can you please pick it up? Thanks, Liu Ying
