[PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Peter Robinson]

This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
and the associated firmware clock entry.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulie...@suse.de>
Signed-off-by: Peter Robinson <pbrobin...@gmail.com>
---
Changes since v5:
- Move the firmware clock to bcm2711-rpi.dtsi

 arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
 arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi 
b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..98817a6675b9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -69,6 +69,10 @@ blconfig: nvram@0 {
        };
 };
 
+&v3d {
+       clocks = <&firmware_clocks 5>;
+};
+
 &vchiq {
        interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..177662257b16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
                                #size-cells = <0x0>;
                        };
                };
+
+               v3d: gpu@7ec00000 {
+                       compatible = "brcm,bcm2711-v3d";
+                       reg = <0x0 0x7ec00000 0x4000>,
+                             <0x0 0x7ec04000 0x4000>;
+                       reg-names = "hub", "core0";
+
+                       power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+                       resets = <&pm BCM2835_RESET_V3D>;
+                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+               };
        };
 };
 
-- 
2.36.1