Hi Maxime, пт, 3 июн. 2022 г. в 11:24, Maxime Ripard <max...@cerno.tech>: > > Hi, > > On Thu, Jun 02, 2022 at 06:01:18PM +0000, Roman Stratiienko wrote: > > According to DE2.0/DE3.0 manual VI scaler enable register is double > > buffered, but de facto it doesn't, or the hardware has the shadow > > register latching issues which causes single-frame picture corruption > > after changing the state of scaler enable register. > > > > Allow the user to keep the scaler always enabled, preventing the UI > > glitches on the transition from scaled to unscaled state. > > > > NOTE: > > UI layer scaler has more registers with double-buffering issue and can't > > be workarounded in the same manner. > > > > You may find a python test and a demo video for this issue at [1] > > > > [1]: https://github.com/GloDroid/glodroid_tests/issues/4 > > Please describe the issue entirely here. The commit log must be > self-sufficient.
Commit message already states "single-frame picture corruption after changing the state of scaler enable register", therefore I find it already self-sufficient Also I find demo videos and link to tests useful for the followers to go further with investigation. If you have something specific in mind when asking to enhance the commit message please say it. > > > Signed-off-by: Roman Stratiienko <r.stratiie...@gmail.com> > > --- > > drivers/gpu/drm/sun4i/sun8i_mixer.c | 12 ++++++++++++ > > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 4 +++- > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c > > b/drivers/gpu/drm/sun4i/sun8i_mixer.c > > index 71ab0a00b4de..15cad0330f66 100644 > > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c > > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c > > @@ -27,6 +27,18 @@ > > #include "sun8i_vi_layer.h" > > #include "sunxi_engine.h" > > > > +/* According to DE2.0/DE3.0 manual VI scaler enable register is double > > + * buffered, but de facto it doesn't, or the hardware has the shadow > > + * register latching issues which causes single-frame picture corruption > > + * after changing the state of scaler enable register. > > + * Allow the user to keep the scaler always enabled, preventing the UI > > + * glitches on the transition from scaled to unscaled state. > > + */ > > +int sun8i_vi_keep_scaler_enabled; > > +MODULE_PARM_DESC(keep_vi_scaler_enabled, > > + "Keep VI scaler enabled (1 = enabled, 0 = disabled > > (default))"); > > +module_param_named(keep_vi_scaler_enabled, sun8i_vi_keep_scaler_enabled, > > int, 0644); > > + > > It's not clear to me why we would want to make that a parameter? > >1 If it never works, we should fix it once and for all and not allow a broken >setup at all. It's a hardware issue and can be fixed only within the hardware. Current patch is a workaround that if enabled can cause increased power consumption for existing users. Therefore I think it is better to give existing distro-maintainers a chance to test it prior to delivery. Also I do not have all the sunxi SOCs to test it. My tests were limited only by A64 and H6 SOCs. > Maxime Best regards, Roman
