Drop #address/#size-cells from eDP device node. For eDP the panels are not described directly under the controller node. They are either present under aux-bus child node, or they are declared separately (e.g. in a /soc node).
Signed-off-by: Dmitry Baryshkov <[email protected]> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 21ab986968e2..004cbbb084a2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3740,9 +3740,6 @@ mdss_edp: edp@aea0000 { operating-points-v2 = <&edp_opp_table>; power-domains = <&rpmhpd SC7280_CX>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; ports { -- 2.35.1
