Hi, Ivaylo On Mon, 15 Aug 2022 at 14:23, Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com> wrote: > > Hi Liu, > > On 14.08.22 г. 17:27 ч., Yongqin Liu wrote: > > Hi, IvayIo > > > > Thanks very much for the reply! > > > > On Sat, 13 Aug 2022 at 14:58, Ivaylo Dimitrov > > <ivo.g.dimitrov...@gmail.com> wrote: > >> > >> Hi Liu, > >> > >> On 12.08.22 г. 7:35 ч., Yongqin Liu wrote: > >>> Hi, Ivaylo, Tomi > >>> > >>> We have one X15 Android AOSP master build, it could not have the home > >>> screen displayed > >>> on the hdmi monitor connected with this change, with the following > >>> message printed on the serial console > >>> [ 607.404205] omapdrm omapdrm.0: Failed to setup plane plane-0 > >>> [ 607.410522] omapdrm omapdrm.0: Failed to setup plane plane-1 > >>> [ 607.416381] omapdrm omapdrm.0: Failed to setup plane plane-2 > >>> [ 607.422088] omapdrm omapdrm.0: Failed to setup plane plane-3 > >>> > >>> # for details, please check the link here: http://ix.io/47m1 > >>> > >>> It will work with home screen displayed on the hdmi monitor if this > >>> change is reverted. > >>> > >>> Is this the broken problem you talked about here? > >>> > >>> And could you please give some suggestions on how to have the x15 > >>> Android build work with this change? > >>> > >> > >> Make sure scanout (i.e. those to be displayed) buffers are actually > >> allocated as such - OMAP_BO_SCANOUT flag must be set when calling > >> omap_bo_new(). > > > > I am not familiar with this area, I am sorry if I asked quite silly > > questions:( > > I googled omap_bo_new, and found it's a function of libdrm here[1], is > > it what you meant here? > > > > Yes, calling this function from userspace ends in kernel code the > $subject patch is part of. > > > If it's the omap_bo_new that we should pass OMAP_BO_SCANOUT when it is > > called, > > then is it the correct way to update omap_bo_new to add the OMAP_BO_SCANOUT > > flag > > before it calls omap_bo_new_impl? > > > > omap_bo_new() is fine and does not need any updates/fixes, it is the > code that uses it (whoever it is, I am not familiar with the userspace > you are using) that shall pass correct flags (third parameter) when > calling it.
Sorry, I do not get the point here. Like you said, the code that calls omap_bo_new needs to pass OMAP_BO_SCANOUT, then IMO omap_bo_new should be the best place to add the OMAP_BO_SCANOUT flag, (like via flags = flags | OMAP_BO_SCANOUT), that could help avoid missing the flag by some code, and also avoids hacks/changes on the possible blob binaries. Do I misunderstand somewhere? Or is there some case that OMAP_BO_SCANOUT shouldn't be passed when omap_bo_new is called? > BTW you shall really find who and how uses OMAP BO API, in theory it > might use ioctls directly and not call omap_bo_xxx functions. Do you mean the DRM_OMAP_GEM_NEW ioctl api? There is no place in the AOSP tree to call that except the omap_bo_new_impl function, which is called by the omap_bo_new and omap_bo_new_tiled functions. The omap_bo_new should not be called with the OMAP_BO_TILED flag, while the omap_bo_new_tiled should be called with the OMAP_BO_TILED flag Regarding to the omap_bo_new function, there are 2 places call it in the AOSP tree: #1 ./external/libkmsxx/kms++/src/omap/omapframebuffer.cpp #2 ./device/ti/beagle_x15/gpu/gralloc.am57x.so #1 seems not used in AOSP yet, and #2 is one blob binary we do not have the source for. > strace > would be your friend there. or gdb, or whatever tools are used on > android. Or put some printfs() in omap_bo_new() that output the PID of > the calling process, etc. Thanks a lot for these great suggestions! Will use them when possible. > > And another question is that, since the userspace(libdrm) will be used > > to work with different kernel versions, > > like the old 4.14, 4.19, etc, do you think there will be problem to > > pass OMAP_BO_SCANOUT > > from the userspace side with the old kernels(which does not have this > > change)? > > does this change need to be backported to the old kernel versions? > > There should not be any issue. The changes could be backported if one > hits the issues this $series is fixing, but there is no need. Thanks for the confirmation! I just boot-tested with adding OMAP_BO_SCANOUT in the omap_bo_new function, and it worked with the current 4.14, 4.19, and the mainline kernels. # via adding line "flags = flags | OMAP_BO_SCANOUT" in the omap_bo_new function. > > > > And the last question is that, omap_bo_new might be called by some > > property binaries what not everyone > > could get the source to update, for such case what's your suggestions? > > > > Hard to say without knowing what that library would be. > > When I hit issues with closed blobs, sometimes I reverse-engineer them > to fix the issue, example: > > https://github.com/maemo-leste/sgx-ddk-um/tree/master/dbm > > This is REed libdbm from sgx-ddk-um 1.17.4948957, that is responsible > for allocating BOs (what omap_bo_new() does) but it uses DUMB buffers > API, instead of OMAP BO API. > > I guess you are using some older version of sgx-ddk-um, so you may fix > in similar way. Or binary patch. The blob binary that calls omap_bo_new is the gralloc.am57x.so here[2]: any suggestions with it? # sorry, I am not able to find out how you did the reverse-engineer work# with the dbm repository shared here, # not sure if you could give some tutorial steps for the similar reverse-engineer# work with gralloc.am57x.so [2]: https://android.googlesource.com/device/ti/beagle-x15/+/refs/heads/master/gpu/gralloc.am57x.so Thanks, Yongqin Liu > >>> On Thu, 17 Feb 2022 at 23:29, Ivaylo Dimitrov > >>> <ivo.g.dimitrov...@gmail.com> wrote: > >>>> > >>>> > >>>> > >>>> On 17.02.22 г. 14:46 ч., Tomi Valkeinen wrote: > >>>>> Hi, > >>>>> > >>>>> On 19/01/2022 12:23, Ivaylo Dimitrov wrote: > >>>>>> On devices with DMM, all allocations are done through either DMM or > >>>>>> TILER. > >>>>>> DMM/TILER being a limited resource means that such allocations will > >>>>>> start > >>>>>> to fail before actual free memory is exhausted. What is even worse is > >>>>>> that > >>>>>> with time DMM/TILER space gets fragmented to the point that even if we > >>>>>> have > >>>>>> enough free DMM/TILER space and free memory, allocation fails because > >>>>>> there > >>>>>> is no big enough free block in DMM/TILER space. > >>>>>> > >>>>>> Such failures can be easily observed with OMAP xorg DDX, for example - > >>>>>> starting few GUI applications (so buffers for their windows are > >>>>>> allocated) > >>>>>> and then rotating landscape<->portrait while closing and opening new > >>>>>> windows soon results in allocation failures. > >>>>>> > >>>>>> Fix that by mapping buffers through DMM/TILER only when really needed, > >>>>>> like, for scanout buffers. > >>>>> > >>>>> Doesn't this break users that get a buffer from omapdrm and expect it to > >>>>> be contiguous? > >>>>> > >>>> > >>>> If you mean dumb buffer, then no, this does not break users as dumb > >>>> buffers are allocated as scanout: > >>>> > >>>> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/omapdrm/omap_gem.c#L603 > >>>> > >>>> If you mean omap_bo allocated buffers, then if users want > >>>> linear(scanout) buffer, then they request it explicitly by passing > >>>> OMAP_BO_SCANOUT. > >>>> > >>>> Ivo > >>> > >>> > >>> > > > > > > -- Best Regards, Yongqin Liu --------------------------------------------------------------- #mailing list linaro-andr...@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-android