Hi, On Sun, Aug 21, 2022 at 06:33:12PM +0200, Noralf Trønnes wrote: > Den 29.07.2022 18.34, skrev Maxime Ripard: > > Hi, > > > > Here's a series aiming at improving the command line named modes support, > > and more importantly how we deal with all the analog TV variants. > > > > The named modes support were initially introduced to allow to specify the > > analog TV mode to be used. > > > > However, this was causing multiple issues: > > > > * The mode name parsed on the command line was passed directly to the > > driver, which had to figure out which mode it was suppose to match; > > > > * Figuring that out wasn't really easy, since the video= argument or what > > the userspace might not even have a name in the first place, but > > instead could have passed a mode with the same timings; > > > > * The fallback to matching on the timings was mostly working as long as > > we were supporting one 525 lines (most likely NSTC) and one 625 lines > > (PAL), but couldn't differentiate between two modes with the same > > timings (NTSC vs PAL-M vs NSTC-J for example); > > > > * There was also some overlap with the tv mode property registered by > > drm_mode_create_tv_properties(), but named modes weren't interacting > > with that property at all. > > > > * Even though that property was generic, its possible values were > > specific to each drivers, which made some generic support difficult. > > > > Thus, I chose to tackle in multiple steps: > > > > * A new TV norm property was introduced, with generic values, each driver > > reporting through a bitmask what standard it supports to the userspace; > > > > * This option was added to the command line parsing code to be able to > > specify it on the kernel command line, and new atomic_check and reset > > helpers were created to integrate properly into atomic KMS; > > > > * The named mode parsing code is now creating a proper display mode for > > the given named mode, and the TV standard will thus be part of the > > connector state; > > > > * Two drivers were converted and tested for now (vc4 and sun4i), with > > some backward compatibility code to translate the old TV mode to the > > new TV mode; > > > > Unit tests were created along the way. Nouveau, ch7006 and gud are > > currently broken for now since I expect that work to be reworked fairly > > significantly. I'm also not entirely sure about how to migrate GUD to the > > new property. > > > > Let me know what you think, > > Maxime > > > > I don't know if it's related to this patchset or not, but I do get this: > > pi@pi4t:~ $ sudo dmesg -C && sudo modprobe -r vc4 && sudo modprobe vc4 > && dmesg > [ 430.066211] Console: switching to colour dummy device 80x30 > [ 431.294788] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) > [ 431.295115] vc4-drm gpu: bound fec13000.vec (ops vc4_vec_ops [vc4]) > [ 431.295467] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) > [ 431.295804] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops > [vc4]) > [ 431.298895] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 > [ 441.444250] vc4-drm gpu: [drm] *ERROR* [CRTC:68:crtc-1] flip_done > timed out > [ 441.446529] Console: switching to colour frame buffer device 90x30 > [ 451.684321] vc4-drm gpu: [drm] *ERROR* flip_done timed out > [ 451.684347] vc4-drm gpu: [drm] *ERROR* [CRTC:68:crtc-1] commit wait > timed out > [ 461.924255] vc4-drm gpu: [drm] *ERROR* flip_done timed out > [ 461.924281] vc4-drm gpu: [drm] *ERROR* [CONNECTOR:45:Composite-1] > commit wait timed out > [ 472.164006] vc4-drm gpu: [drm] *ERROR* flip_done timed out > [ 472.164031] vc4-drm gpu: [drm] *ERROR* [PLANE:61:plane-1] commit wait > timed out > [ 482.403877] vc4-drm gpu: [drm] *ERROR* flip_done timed out > [ 482.403903] vc4-drm gpu: [drm] *ERROR* Timed out waiting for commit > [ 492.643799] vc4-drm gpu: [drm] *ERROR* [CRTC:68:crtc-1] flip_done > timed out > [ 492.647073] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
Module unloading/reloading has been janky for a while. I've fixed it up recently but it doesn't surprise me that there's still some situation that won't work. Is it on a Pi3? Maxime