The macro DRM_MODE_INIT() initializes an instance of
struct drm_display_mode with typical parameters. Convert simpledrm
and also update the macro DRM_SIMPLE_MODE().
v3:
* fix DRM_MODE_INIT() docs (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>
---
drivers/gpu/drm/tiny/simpledrm.c | 23 ++++++++-------------
include/drm/drm_modes.h | 35 +++++++++++++++++++++++++++-----
2 files changed, 39 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 5bed4d564104..404290760c60 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -30,16 +30,6 @@
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
-/*
- * Assume a monitor resolution of 96 dpi to
- * get a somewhat reasonable screen size.
- */
-#define RES_MM(d) \
- (((d) * 254ul) / (96ul * 10ul))
-
-#define SIMPLEDRM_MODE(hd, vd) \
- DRM_SIMPLE_MODE(hd, vd, RES_MM(hd), RES_MM(vd))
-
/*
* Helpers for simplefb
*/
@@ -641,10 +631,15 @@ static const struct drm_mode_config_funcs
simpledrm_mode_config_funcs = {
static struct drm_display_mode simpledrm_mode(unsigned int width,
unsigned int height)
{
- struct drm_display_mode mode = { SIMPLEDRM_MODE(width, height) };
-
- mode.clock = mode.hdisplay * mode.vdisplay * 60 / 1000 /* kHz */;
- drm_mode_set_name(&mode);
+ /*
+ * Assume a monitor resolution of 96 dpi to
+ * get a somewhat reasonable screen size.
+ */
+ const struct drm_display_mode mode = {
+ DRM_MODE_INIT(60, width, height,
+ DRM_MODE_RES_MM(width, 96ul),
+ DRM_MODE_RES_MM(height, 96ul))
+ };
return mode;
}
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index a80ae9639e96..b0c680e6f670 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -138,6 +138,35 @@ enum drm_mode_status {
.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
.vscan = (vs), .flags = (f)
+/**
+ * DRM_MODE_RES_MM - Calculates the display size from resolution and DPI
+ * @res: The resolution in pixel
+ * @dpi: The number of dots per inch
+ */
+#define DRM_MODE_RES_MM(res, dpi) \
+ (((res) * 254ul) / ((dpi) * 10ul))
+
+#define __DRM_MODE_INIT(pix, hd, vd, hd_mm, vd_mm) \
+ .type = DRM_MODE_TYPE_DRIVER, .clock = (pix), \
+ .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
+ .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
+ .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
+ .height_mm = (vd_mm)
+
+/**
+ * DRM_MODE_INIT - Initialize display mode
+ * @hz: Vertical refresh rate in Hertz
+ * @hd: Horizontal resolution, width
+ * @vd: Vertical resolution, height
+ * @hd_mm: Display width in millimeters
+ * @vd_mm: Display height in millimeters
+ *
+ * This macro initializes a &drm_display_mode that contains information about
+ * refresh rate, resolution and physical size.
+ */
+#define DRM_MODE_INIT(hz, hd, vd, hd_mm, vd_mm) \
+ __DRM_MODE_INIT((hd) * (vd) * (hz) / 1000 /* kHz */, hd, vd, hd_mm,
vd_mm)
+
/**
* DRM_SIMPLE_MODE - Simple display mode
* @hd: Horizontal resolution, width
@@ -149,11 +178,7 @@ enum drm_mode_status {
* resolution and physical size.
*/
#define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \
- .type = DRM_MODE_TYPE_DRIVER, .clock = 1 /* pass validation */, \
- .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \
- .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \
- .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \
- .height_mm = (vd_mm)
+ __DRM_MODE_INIT(1 /* pass validation */, hd, vd, hd_mm, vd_mm)
#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
--
2.37.2
