Hi,
On 9/12/22 20:02, Chris Morgan wrote:
> From: Chris Morgan <macromor...@hotmail.com>
Cc: Sascha -> any thoughts on this one?
Best regards,
Michael
> If I use more than one VP to output on an RK3566 based device I
> receive the following error (and then everything freezes):
>
> [ 0.838375] Unable to handle kernel NULL pointer dereference at virtual
> address 0000000000000250
> [ 0.839191] Mem abort info:
> [ 0.839442] ESR = 0x0000000096000005
> [ 0.839785] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 0.840256] SET = 0, FnV = 0
> [ 0.840530] EA = 0, S1PTW = 0
> [ 0.840821] FSC = 0x05: level 1 translation fault
> [ 0.841254] Data abort info:
> [ 0.841512] ISV = 0, ISS = 0x00000005
> [ 0.841864] CM = 0, WnR = 0
> [ 0.842130] [0000000000000250] user address but active_mm is swapper
> [ 0.842704] Internal error: Oops: 96000005 [#1] SMP
> [ 0.843139] Modules linked in:
> [ 0.843420] CPU: 0 PID: 37 Comm: kworker/u8:1 Not tainted 6.0.0-rc5+ #40
> [ 0.844013] Hardware name: RG503 (DT)
> [ 0.844343] Workqueue: events_unbound deferred_probe_work_func
> [ 0.844871] pstate: 80000009 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 0.845487] pc : __drm_crtc_init_with_planes+0x48/0x2e4
> [ 0.845956] lr : drm_crtc_init_with_planes+0x68/0x94
> [ 0.846399] sp : ffffffc00a7a3710
> [ 0.846695] x29: ffffffc00a7a3710 x28: ffffff8000fb4080 x27:
> ffffffc00a7a37a0
> [ 0.847332] x26: ffffffc0097d01c7 x25: ffffff8000fb44d8 x24:
> ffffffc0097d01c7
> [ 0.847967] x23: ffffffc009311870 x22: 0000000000000000 x21:
> 0000000000000008
> [ 0.848603] x20: ffffff80010d0800 x19: ffffff8000fb44e8 x18:
> 0000000000000000
> [ 0.849237] x17: 08000000000000d1 x16: 0800000000000091 x15:
> 08000000000000c1
> [ 0.849874] x14: 0000000000000000 x13: 3432564e3631564e x12:
> 3231564e36314742
> [ 0.850509] x11: 3631475234324742 x10: 000000000000002d x9 :
> ffffffc008682004
> [ 0.851144] x8 : 00000000006f7475 x7 : 00000000fffffff0 x6 :
> ffffffc00a7a37a0
> [ 0.851778] x5 : ffffffc0097d01c7 x4 : ffffffc009311870 x3 :
> 0000000000000000
> [ 0.852412] x2 : 0000000000000008 x1 : ffffff8000fb44e8 x0 :
> ffffff80010d0800
> [ 0.853048] Call trace:
> [ 0.853270] __drm_crtc_init_with_planes+0x48/0x2e4
> [ 0.853706] drm_crtc_init_with_planes+0x68/0x94
> [ 0.854118] vop2_bind+0x89c/0x920
> [ 0.854429] component_bind_all+0x18c/0x290
> [ 0.854805] rockchip_drm_bind+0xe4/0x1f0
> [ 0.855166] try_to_bring_up_aggregate_device+0x9c/0x290
> [ 0.855639] __component_add+0x110/0x168
> [ 0.855991] component_add+0x1c/0x28
> [ 0.856312] dw_mipi_dsi_rockchip_host_attach+0x98/0x10c
> [ 0.856785] dw_mipi_dsi_host_attach+0xbc/0xd0
> [ 0.857184] mipi_dsi_attach+0x30/0x44
> [ 0.857521] devm_mipi_dsi_attach+0x2c/0x70
> [ 0.857896] ams495qa01_probe+0x2d4/0x33c
> [ 0.858257] spi_probe+0x8c/0xb8
> [ 0.858550] really_probe+0x1e0/0x3b8
> [ 0.858881] __driver_probe_device+0x16c/0x184
> [ 0.859278] driver_probe_device+0x4c/0xfc
> [ 0.859646] __device_attach_driver+0xf0/0x170
> [ 0.860043] bus_for_each_drv+0xa4/0xcc
> [ 0.860389] __device_attach+0xfc/0x1a8
> [ 0.860733] device_initial_probe+0x1c/0x28
> [ 0.861108] bus_probe_device+0x38/0x9c
> [ 0.861452] deferred_probe_work_func+0xdc/0xf0
> [ 0.861855] process_one_work+0x1b0/0x260
> [ 0.862217] process_scheduled_works+0x4c/0x50
> [ 0.862614] worker_thread+0x1f0/0x26c
> [ 0.862949] kthread+0xc4/0xd4
> [ 0.863227] ret_from_fork+0x10/0x20
> [ 0.863553] Code: aa0503fa f9002bfb aa0603fb b40000a2 (b9424840)
> [ 0.864095] ---[ end trace 0000000000000000 ]---
>
> A cursory reading of the datasheet suggests it's possible to have
> simultaneous output to 2 distinct outputs. On page 13 it states:
>
> Support two simultaneous displays(same source) in the following interfaces:
> - MIPI_DSI_TX
> - LVDS
> - HDMI
> - eDP
>
> In order to achieve this though, I need to output to VP0 and VP1 (or
> any 2 distinct VPs really). This is so I can have the ref clock set
> to 24MHz for the HDMI and the pixel clock of the DSI panel (for the
> example above it's 33.5MHz). Currently, only by removing this code
> block is such a thing possible, though I'm not sure if long-term
> there should only be 1 CRTC for the rk3566 (and 2 CRTCs for 3568)
> along with a max of 2 encoders for rk3566 (and 3 encoders for 3568).
>
> Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
>
> Signed-off-by: Chris Morgan <macromor...@hotmail.com>
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 --------------
> 1 file changed, 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> index e4631f515ba4..f18d7f6f9f86 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> @@ -2289,20 +2289,6 @@ static int vop2_create_crtc(struct vop2 *vop2)
> struct vop2_win *win = &vop2->win[i];
> u32 possible_crtcs;
>
> - if (vop2->data->soc_id == 3566) {
> - /*
> - * On RK3566 these windows don't have an independent
> - * framebuffer. They share the framebuffer with smart0,
> - * esmart0 and cluster0 respectively.
> - */
> - switch (win->data->phys_id) {
> - case ROCKCHIP_VOP2_SMART1:
> - case ROCKCHIP_VOP2_ESMART1:
> - case ROCKCHIP_VOP2_CLUSTER1:
> - continue;
> - }
> - }
> -
> if (win->type == DRM_PLANE_TYPE_PRIMARY) {
> vp = find_vp_without_primary(vop2);
> if (vp) {
