Hi
data-lanes is output configuration. Maybe it is not suitable to put data-lanes
in input endpoint.
extcon doesn't have output endpoint, so I don't know where to put is better.
-----Original Message-----
From: Neil Armstrong <neil.armstr...@linaro.org>
Sent: Thursday, September 29, 2022 4:40 PM
To: Allen Chen (陳柏宇) <allen.c...@ite.com.tw>
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
<devicet...@vger.kernel.org>; Kenneth Hung (洪家倫) <kenneth.h...@ite.com.tw>;
Jernej Skrabec <jernej.skra...@gmail.com>; Krzysztof Kozlowski
<krzysztof.kozlowski...@linaro.org>; Jau-Chih Tseng (曾昭智)
<jau-chih.ts...@ite.com.tw>; David Airlie <airl...@linux.ie>; open list:DRM
DRIVERS <dri-devel@lists.freedesktop.org>; Neil Armstrong
<narmstr...@baylibre.com>; open list <linux-ker...@vger.kernel.org>; Robert
Foss <robert.f...@linaro.org>; Pin-yen Lin <treapk...@chromium.org>; Hermes Wu
(吳佳宏) <hermes...@ite.com.tw>; Rob Herring <robh...@kernel.org>; Laurent
Pinchart <laurent.pinch...@ideasonboard.com>; Andrzej Hajda
<andrzej.ha...@intel.com>; Jonas Karlman <jo...@kwiboo.se>
Subject: Re: [PATCH v2 1/2] dt-bindings: it6505: add properties to restrict
output bandwidth
Hi,
On 29/09/2022 03:44, allen wrote:
> From: allen chen <allen.c...@ite.com.tw>
>
> Add properties to restrict dp output data-lanes and clock.
>
> Signed-off-by: Pin-Yen Lin <treapk...@chromium.org>
> Signed-off-by: Allen Chen <allen.c...@ite.com.tw>
> ---
> .../devicetree/bindings/display/bridge/ite,it6505.yaml | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index 833d11b2303a..62b9f2192202 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -52,6 +52,14 @@ properties:
> maxItems: 1
> description: extcon specifier for the Power Delivery
>
> + data-lanes:
> + maxItems: 1
> + description: restrict the dp output data-lanes with value of 1-4
Can't you use the data-lanes property in the first port endpoint ?
Look at Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> +
> + max-pixel-clock-khz:
> + maxItems: 1
> + description: restrict max pixel clock
New vendor specific properties should have the ite, prefix.
> +
> port:
> $ref: /schemas/graph.yaml#/properties/port
> description: A port node pointing to DPI host port node @@ -84,6
> +92,8 @@ examples:
> pwr18-supply = <&it6505_pp18_reg>;
> reset-gpios = <&pio 179 1>;
> extcon = <&usbc_extcon>;
> + data-lanes = <2>;
> + max-pixel-clock-khz = <150000>;
>
> port {
> it6505_in: endpoint {
Thanks,
Neil
