Hi Matthew, On 10/25/22 21:32, Matthew Garrett wrote: > On Tue, Oct 25, 2022 at 08:50:54PM +0200, Hans de Goede wrote: > >> That is a valid point, but keep in mind that this is only used on ACPI >> platforms and then only on devices with a builtin LCD panel and then >> only by GPU drivers which actually call acpi_video_get_backlight_type(), >> so e.g. not by all the ARM specific display drivers. >> >> So I believe that Chromebooks quite likely are the only devices with >> this issue. > > My laptop is, uh, weird, but it falls into this category. > >>> I think for this to work correctly you need to have >>> the infrastructure be aware of whether or not a vendor interface exists, >>> which means having to handle cleanup if a vendor-specific module gets >>> loaded later. >> >> Getting rid of the whole ping-ponging of which backlight drivers >> get loaded during boot was actually one of the goals of the rework >> which landed in 6.1 this actually allowed us to remove some quirks >> because some hw/firmware did not like us changing our mind and >> switching backlight interfaces after first poking another one. >> So we definitely don't want to go back to the ping-pong thing. > > Defaulting to native but then having a vendor driver be able to disable > native drivers seems easiest? It shouldn't be a regression over the > previous state of affairs since both drivers were being loaded already.
Part of the reason for the ACPI backlight detect refactor is because of a planned new backlight uAPI where the brightness control becomes a property on the drm connector object, for a RFC including the rationale behind this planned uAPI change see: https://lore.kernel.org/dri-devel/b61d3eeb-6213-afac-2e70-7b9791c86...@redhat.com/ These plans require that there is only 1 backlight device registered (per panel). Having the native driver come and then go and be replaced with the vendor driver would also be quite inconvenient for these planned changes. As such I would rather find a solution for your "weird" laptop so that acpi_video_get_backlight_type() just always returns vendor there. Note that drivers/acpi/video_detect.c already has a DMI quirk tables for models where the heuristics from acpi_video_get_backlight_type() don't work. In general we (mostly me) try to make it so that the heuristics work on most models, to avoid needing to add every model under the sun to the DMI quirk table, but if your laptop is somehow special then adding a DMI quirk for it should be fine ? Can you perhaps explain a bit in what way your laptop is weird ? Note that technically if the native backlight does not work, then the GPU driver really should not even try to register it. But sometimes the video-bios-tables claim the backlight pwm input is attached to the GPU while it is not and things have evolved in such a way that the DMI quirks for that live in acpi/video_detect.c rather then in the GPU driver. Regards, Hans
