Add GPIO line names as described by the sm8350-hdk schematic. Signed-off-by: Robert Foss <robert.f...@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 205 ++++++++++++++++++++++++ 1 file changed, 205 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 0fcf5bd88fc7..e6deb08c6da0 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -233,6 +233,211 @@ &slpi { &tlmm { gpio-reserved-ranges = <52 8>; + + gpio-line-names = + "APPS_I2C_SDA", /* GPIO_0 */ + "APPS_I2C_SCL", + "FSA_INT_N", + "USER_LED3_EN", + "SMBUS_SDA_1P8", + "SMBUS_SCL_1P8", + "2M2_3P3_EN", + "ALERT_DUAL_M2_N", + "EXP_UART_CTS", + "EXP_UART_RFR", + "EXP_UART_TX", /* GPIO_10 */ + "EXP_UART_RX", + "NC", + "NC", + "RCM_MARKER1", + "WSA0_EN", + "CAM1_RESET_N", + "CAM0_RESET_N", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "TS_I2C_SDA", /* GPIO_20 */ + "TS_I2C_SCL", + "TS_RESET_N", + "TS_INT_N", + "DISP0_RESET_N", + "DISP1_RESET_N", + "ETH_RESET", + "RCM_MARKER2", + "CAM_DC_MIPI_MUX_EN", + "CAM_DC_MIPI_MUX_SEL", + "AFC_PHY_TA_D_PLUS", /* GPIO_30 */ + "AFC_PHY_TA_D_MINUS", + "PM8008_1_IRQ", + "PM8008_1_RESET_N", + "PM8008_2_IRQ", + "PM8008_2_RESET_N", + "CAM_DC_I3C_SDA", + "CAM_DC_I3C_SCL", + "FP_INT_N", + "FP_WUHB_INT_N", + "SMB_SPMI_DATA", /* GPIO_40 */ + "SMB_SPMI_CLK", + "USB_HUB_RESET", + "FORCE_USB_BOOT", + "LRF_IRQ", + "NC", + "IMU2_INT", + "HDMI_3P3_EN", + "HDMI_RSTN", + "HDMI_1P2_EN", + "HDMI_INT", /* GPIO_50 */ + "USB1_ID", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_CLK", + "FP_SPI_CS_N", + "NFC_ESE_SPI_MISO", + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_CLK", + "NFC_ESE_SPI_CS", + "NFC_I2C_SDA", /* GPIO_60 */ + "NFC_I2C_SCLC", + "NFC_EN", + "NFC_CLK_REQ", + "HST_WLAN_EN", + "HST_BT_EN", + "HST_SW_CTRL", + "NC", + "HST_BT_UART_CTS", + "HST_BT_UART_RFR", + "HST_BT_UART_TX", /* GPIO_70 */ + "HST_BT_UART_RX", + "CAM_DC_SPI0_MISO", + "CAM_DC_SPI0_MOSI", + "CAM_DC_SPI0_CLK", + "CAM_DC_SPI0_CS_N", + "CAM_DC_SPI1_MISO", + "CAM_DC_SPI1_MOSI", + "CAM_DC_SPI1_CLK", + "CAM_DC_SPI1_CS_N", + "HALL_INT_N", /* GPIO_80 */ + "USB_PHY_PS", + "MDP_VSYNC_P", + "MDP_VSYNC_S", + "ETH_3P3_EN", + "RADAR_INT", + "NFC_DWL_REQ", + "SM_GPIO_87", + "WCD_RESET_N", + "ALSP_INT_N", + "PRESS_INT", /* GPIO_90 */ + "SAR_INT_N", + "SD_CARD_DET_N", + "NC", + "PCIE0_RESET_N", + "PCIE0_CLK_REQ_N", + "PCIE0_WAKE_N", + "PCIE1_RESET_N", + "PCIE1_CLK_REQ_N", + "PCIE1_WAKE_N", + "CAM_MCLK0", /* GPIO_100 */ + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CAM_MCLK4", + "CAM_MCLK5", + "CAM2_RESET_N", + "CCI_I2C0_SDA", + "CCI_I2C0_SCL", + "CCI_I2C1_SDA", + "CCI_I2C1_SCL", /* GPIO_110 */ + "CCI_I2C2_SDA", + "CCI_I2C2_SCL", + "CCI_I2C3_SDA", + "CCI_I2C3_SCL", + "CAM5_RESET_N", + "CAM4_RESET_N", + "CAM3_RESET_N", + "IMU1_INT", + "MAG_INT_N", + "MI2S2_I2S_SCK", /* GPIO_120 */ + "MI2S2_I2S_DAT0", + "MI2S2_I2S_WS", + "HIFI_DAC_I2S_MCLK", + "MI2S2_I2S_DAT1", + "HIFI_DAC_I2S_SCK", + "HIFI_DAC_I2S_DAT0", + "NC", + "HIFI_DAC_I2S_WS", + "HST_BT_WLAN_SLIMBUS_CLK", + "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ + "BT_LED_EN", + "WLAN_LED_EN", + "NC", + "NC", + "NC", + "UIM2_PRESENT", + "NC", + "NC", + "NC", + "UIM1_PRESENT", /* GPIO_140 */ + "NC", + "SM_RFFE0_DATA", + "NC", + "SM_RFFE1_DATA", + "SM_MSS_GRFC4", + "SM_MSS_GRFC5", + "SM_MSS_GRFC6", + "SM_MSS_GRFC7", + "SM_RFFE4_CLK", + "SM_RFFE4_DATA", /* GPIO_150 */ + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "HST_SW_CTRL", + "DSI0_STATUS", + "DSI1_STATUS", + "APPS_PBL_BOOT_SPEED_1", + "APPS_BOOT_FROM_ROM", + "APPS_PBL_BOOT_SPEED_0", + "QLINK0_REQ", + "QLINK0_EN", /* GPIO_160 */ + "QLINK0_WMSS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", /* GPIO_170 */ + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + "DMIC01_CLK", + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "WSA_SWR_CLK", + "WSA_SWR_DATA", + "DMIC45_CLK", /* GPIO_180 */ + "DMIC45_DATA", + "WCD_SWR_TX_DATA2", + "SENSOR_I3C_SDA", + "SENSOR_I3C_SCL", + "CAM_OIS0_I3C_SDA", + "CAM_OIS0_I3C_SCL", + "IMU_SPI_MISO", + "IMU_SPI_MOSI", + "IMU_SPI_CLK", + "IMU_SPI_CS_N", /* GPIO_190 */ + "MAG_I2C_SDA", + "MAG_I2C_SCL", + "SENSOR_I2C_SDA", + "SENSOR_I2C_SCL", + "RADAR_SPI_MISO", + "RADAR_SPI_MOSI", + "RADAR_SPI_CLK", + "RADAR_SPI_CS_N", + "HST_BLE_UART_TX", + "HST_BLE_UART_RX", /* GPIO_200 */ + "HST_WLAN_UART_TX", + "HST_WLAN_UART_RX"; }; &uart2 { -- 2.34.1