On 04/01/2023 11:08, Neil Armstrong wrote:
SM8550 use a 4nm DSI PHYs, which share register definitions
with 7nm DSI PHYs. Rather than duplicating the driver, handle
4nm variant inside the common 5+7nm driver.

Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
  drivers/gpu/drm/msm/Kconfig               |   4 +-
  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |   2 +
  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |   1 +
  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 102 ++++++++++++++++++++++++------
  4 files changed, 89 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index e7b100d97f88..949b18a29a55 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY
          Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
-       bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
+       bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
        depends on DRM_MSM_DSI
        default y
        help
-         Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
+         Choose this option if DSI PHY on 
SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
          is used on the platform.
config DRM_MSM_HDMI
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c 
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 0c956fdab23e..54e03cc9fbe7 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
          .data = &dsi_phy_5nm_8350_cfgs },
        { .compatible = "qcom,dsi-phy-5nm-8450",
          .data = &dsi_phy_5nm_8450_cfgs },
+       { .compatible = "qcom,dsi-phy-4nm-8550",
+         .data = &dsi_phy_4nm_8550_cfgs },
  #endif
        {}
  };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h 
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index f7a907ed2b4b..58f9e09f5224 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
struct msm_dsi_dphy_timing {
        u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c 
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 7b2c16b3a36c..11629c431c30 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -47,6 +47,8 @@
  #define DSI_PHY_7NM_QUIRK_V4_2                BIT(2)
  /* Hardware is V4.3 */
  #define DSI_PHY_7NM_QUIRK_V4_3                BIT(3)
+/* Hardware is V5.2 */
+#define DSI_PHY_7NM_QUIRK_V5_2         BIT(4)
struct dsi_pll_config {
        bool enable_ssc;
@@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm 
*pll, struct dsi_pll_config
if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
                config->pll_clock_inverters = 0x28;
-       else if (pll_freq <= 1000000000ULL)
-               config->pll_clock_inverters = 0xa0;
-       else if (pll_freq <= 2500000000ULL)
-               config->pll_clock_inverters = 0x20;
-       else if (pll_freq <= 3020000000ULL)
-               config->pll_clock_inverters = 0x00;
-       else
-               config->pll_clock_inverters = 0x40;
+       else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+               if (pll_freq <= 1300000000ULL)
+                       config->pll_clock_inverters = 0xa0;
+               else if (pll_freq <= 2500000000ULL)
+                       config->pll_clock_inverters = 0x20;
+               else if (pll_freq <= 4000000000ULL)
+                       config->pll_clock_inverters = 0x00;
+               else
+                       config->pll_clock_inverters = 0x40;
+       } else {
+               if (pll_freq <= 1000000000ULL)
+                       config->pll_clock_inverters = 0xa0;
+               else if (pll_freq <= 2500000000ULL)
+                       config->pll_clock_inverters = 0x20;
+               else if (pll_freq <= 3020000000ULL)
+                       config->pll_clock_inverters = 0x00;
+               else
+                       config->pll_clock_inverters = 0x40;
+       }
config->decimal_div_start = dec;
        config->frac_div_start = frac;
@@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm 
*pll)
                        vco_config_1 = 0x01;
        }
+ if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+               if (pll->vco_current_rate < 1557000000ULL)
+                       vco_config_1 = 0x08;
+               else
+                       vco_config_1 = 0x01;
+       }
+
        dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
                      analog_controls_five_1);
        dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
@@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
                pr_warn("PLL turned on before configuring PHY\n");
/* Request for REFGEN READY */
-       if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+       if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+           (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
                dsi_phy_write(phy->base + 
REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
                udelay(500);
        }
@@ -881,20 +902,38 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
glbl_str_swi_cal_sel_ctrl = 0x00;
        if (phy->cphy_mode) {
-               vreg_ctrl_0 = 0x51;
-               vreg_ctrl_1 = 0x55;
+               if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+                       vreg_ctrl_0 = 0x45;
+                       vreg_ctrl_1 = 0x45;
+               } else {
+                       vreg_ctrl_0 = 0x51;
+                       vreg_ctrl_1 = 0x55;
+               }

Please move these quirk-specific values down, to the rest of if (QUIRK_5_2) statement.

                glbl_hstx_str_ctrl_0 = 0x00;
                glbl_pemph_ctrl_0 = 0x11;
                lane_ctrl0 = 0x17;
        } else {
-               vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
-               vreg_ctrl_1 = 0x5c;
+               if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+                       vreg_ctrl_0 = 0x44;
+                       vreg_ctrl_1 = 0x19;
+               } else {
+                       vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
+                       vreg_ctrl_1 = 0x5c;
+               }
                glbl_hstx_str_ctrl_0 = 0x88;
                glbl_pemph_ctrl_0 = 0x00;
                lane_ctrl0 = 0x1f;
        }
- if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+       if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
+               if (phy->cphy_mode) {
+                       glbl_rescode_top_ctrl = 0x00;
+                       glbl_rescode_bot_ctrl = 0x00;
+               } else {
+                       glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c :  
0x03;
+                       glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  
0x3c;
+               }
+       } else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
                if (phy->cphy_mode) {
                        glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  
0x01;
                        glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 :  
0x3b;
@@ -943,9 +982,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
        dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00);
/* program CMN_CTRL_4 for minor_ver 2 chipsets*/
-       data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0);
-       data = data & (0xf0);
-       if (data == 0x20)
+       if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) ||
+           (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 
0x20)
                dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04);

Ugh. I should change this statement to use quirks too.

/* Configure PHY lane swap (TODO: we need to calculate this) */
@@ -1058,7 +1096,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
        dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
/* Turn off REFGEN Vote */
-       if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
+       if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
+           (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
                dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 
0x0);
                wmb();
                /* Delay to ensure HW removes vote before PHY shut down */
@@ -1092,6 +1131,10 @@ static const struct regulator_bulk_data 
dsi_phy_7nm_97800uA_regulators[] = {
        { .supply = "vdds", .init_load_uA = 97800 },
  };
+static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = {
+       { .supply = "vdds", .init_load_uA = 98400 },
+};
+
  const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
        .has_phy_lane = true,
        .regulator_data = dsi_phy_7nm_36mA_regulators,
@@ -1201,3 +1244,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
        .num_dsi_phy = 2,
        .quirks = DSI_PHY_7NM_QUIRK_V4_3,
  };
+
+const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
+       .has_phy_lane = true,
+       .regulator_data = dsi_phy_7nm_98400uA_regulators,
+       .num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators),
+       .ops = {
+               .enable = dsi_7nm_phy_enable,
+               .disable = dsi_7nm_phy_disable,
+               .pll_init = dsi_pll_7nm_init,
+               .save_pll_state = dsi_7nm_pll_save_state,
+               .restore_pll_state = dsi_7nm_pll_restore_state,
+               .set_continuous_clock = dsi_7nm_set_continuous_clock,
+       },
+       .min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+       .max_pll_rate = 5000000000UL,
+#else
+       .max_pll_rate = ULONG_MAX,
+#endif
+       .io_start = { 0xae95000, 0xae97000 },
+       .num_dsi_phy = 2,
+       .quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};


--
With best wishes
Dmitry

Reply via email to