Hi Tomasz, > -----Original Message----- > From: Tomasz Figa [mailto:t.f...@samsung.com] > Sent: Friday, August 09, 2013 10:16 PM > To: Chanho Park > Cc: inki....@samsung.com; kgene....@samsung.com; dri- > de...@lists.freedesktop.org; kyungmin.p...@samsung.com; > mark.rutl...@arm.com; l.st...@pengutronix.de; s.nawro...@samsung.com; > tomasz.f...@gmail.com; linux-samsung-...@vger.kernel.org; linux-arm- > ker...@lists.infradead.org; devicet...@vger.kernel.org; Thomas Abraham; > swar...@wwwdotorg.org; ian.campb...@citrix.com; rob.herr...@calxeda.com; > pawel.m...@arm.com > Subject: Re: [PATCHv2 5/5] ARM: dts: Add dt binding documentation for > exynos rotator > > Hi Chanho, > > On Friday 09 of August 2013 16:40:53 Chanho Park wrote: > > This patch describes each nodes of rotator and specifies a example how > > to bind it. > > > > Signed-off-by: Chanho Park <chanho61.p...@samsung.com> > > Cc: Thomas Abraham <thomas.abra...@linaro.org> > > Cc: Kukjin Kim <kgene....@samsung.com> > > Cc: Inki Dae <inki....@samsung.com> > > Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > > --- > > .../devicetree/bindings/gpu/samsung-rotator.txt | 26 > > ++++++++++++++++++++ 1 file changed, 26 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/gpu/samsung-rotator.txt > > > > diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt > > b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt new file > > mode 100644 index 0000000..31ee7b5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt > > @@ -0,0 +1,26 @@ > > +* Samsung Image Rotator > > + > > +Required properties: > > + - compatible : value should be following: > > + (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 > > + (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 > > + (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 > > + > > + - reg : Physical base address of the IP registers and length of > memory > > + mapped region. > > + > > + - interrupts : Interrupt number of Rotator > > What about: interrupt specifier for rotator interrupt, according to > format specific to interrupt parent. > > > + > > + - clocks : Clock number described in > > Documentations/devicetree/binding/clock. + > > Perhaps: clock specifier for rotator clock, according to generic clock > bindings.
Become more clearly. Thanks. > > > + - clock-names : Clock name. > > Names of clocks specified in "clocks" property. For exynos rotator this > property should contain only one name: "rotator". > > > +Example: > > + rotator: rotator@12800000 { > > I wonder if we shouldn't use a more generic name here, according to > ePAPR node naming recommendation. Hmm. I'm not sure what name is better than rotator. How about image-rotator@12810000 > > > + compatible = "samsung,exynos4210-rotator"; > > + reg = <0x12810000 0x1000>; > > Typo. Node has 12800000 in unit-address suffix, but this property has > 12810000 instead. Yes. It's typo. I'll correct it now. > > > + interrupts = <0 83 0>; > > + clocks = <&clock 278>; > > + clock-names = "rotator"; > > + status = "disabled"; > > Status property should be omitted from this example, as it's not a part > of this binding. I'll remove the property. Thanks. Best Regards, Chanho Park _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel