On 19/01/2023 10:44, Thomas Zimmermann wrote:
(cc: devicet...@vger.kernel.org, as...@lists.linux.dev)
Hi,
thanks for the patch. I already wondered if the DPI value should be
configurable in some way.
Am 18.01.23 um 19:48 schrieb Rayyan Ansari:
Hello,
The following draft patch adds support for configuring the
height-mm and width-mm DRM properties in the simpledrm driver
via devicetree.
This is useful to get proper scaling in UIs such as Phosh.
An example of using this property is this, taken from my local tree:
framebuffer0: framebuffer@3200000 {
compatible = "simple-framebuffer";
reg = <0x3200000 0x800000>;
format = "a8r8g8b8";
width = <720>;
height = <1280>;
stride = <(720 * 4)>;
width-mm = /bits/ 16 <58>;
height-mm = /bits/ 16 <103>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
power-domains = <&mmcc MDSS_GDSC>;
};
I have tested this on my Lumia 735, and it does indeed
allow Phosh to scale correctly on the screen.
Is this something that is already supported by some device, or just a
pet project of yours?
Phosh is a mobile environment, developed for use on the Librem 5 phone,
but it's also packaged by mobile-focused distros such as postmarketOS
and used on other phones.
https://puri.sm/posts/phosh-overview/
This is my Lumia running Phosh with Firefox open:
https://wiki.postmarketos.org/images/c/c3/Lumia_735_Phosh.png
However, I would like to get some feedback before I write the
documentation.
- What data type should be used?
The width_mm and height_mm properties of the drm_display_mode
struct are defined as u16. I have also made the devicetree
properties as the u16 type, but this requires specifying
"/bits/ 16" before the value. Should u32 be used instead to get
rid of this? If so, how could the conversion from u32->u16 be
handled?
I'd use 32 bits in the DT, just like the other properties.
Noted.
- Style?
I have split the arguments to the DRM_MODE_INIT macro across
multiple lines to increase readability. I'm not sure if this
is the correct style though.
- Anything else?
This is my first time writing code for a Linux driver, so I
would be grateful if you have any suggestions for improvements.
Thanks,
Rayyan.
---
drivers/gpu/drm/tiny/simpledrm.c | 49 +++++++++++++++++++++++++++-----
1 file changed, 42 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c
b/drivers/gpu/drm/tiny/simpledrm.c
index 162eb44dcba8..92109f870b35 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -116,6 +116,15 @@ simplefb_get_format_pd(struct drm_device *dev,
return simplefb_get_validated_format(dev, pd->format);
}
+static void
+simplefb_read_u16_of_optional(struct drm_device *dev, struct
device_node *of_node,
Maybe call it simplefb_read_u16_of_opt()
+ const char *name, u16 *value)
The alignment looks off.
+{
+ int ret = of_property_read_u16(of_node, name, value);
+ if (ret)
+ value = 0;
You mean *value = 0 ?
I think we should be stricter here. Look at the docs at [1]. A result of
0 means success and -EINVAL means that the property does not exist. We
should still report errors for the other errno codes.
Something like
ret = of_property_read_u16()
if (ret) {
if(ret == -EINVAL) {
*value = 0;
ret= 0;
} else {
drm_err(dev, "simplefb: cannot parse framebuffer %s:
"error %d\n", name, ret);
}
}
return ret;
[1] https://elixir.bootlin.com/linux/latest/source/include/linux/of.h#L1202
Will change, thanks for the example and reference.
+}
+
static int
simplefb_read_u32_of(struct drm_device *dev, struct device_node
*of_node,
const char *name, u32 *value)
@@ -184,6 +193,21 @@ simplefb_get_format_of(struct drm_device *dev,
struct device_node *of_node)
return simplefb_get_validated_format(dev, format);
}
+static u16
+simplefb_get_width_mm_of(struct drm_device *dev, struct device_node
*of_node)
+{
+ u16 width_mm;
+ simplefb_read_u16_of_optional(dev, of_node, "width-mm", &width_mm);
+ return width_mm;
+}
+
+static u16
+simplefb_get_height_mm_of(struct drm_device *dev, struct device_node
*of_node)
+{
+ u16 height_mm;
+ simplefb_read_u16_of_optional(dev, of_node, "height-mm",
&height_mm);
+ return height_mm;
+}
/*
* Simple Framebuffer device
*/
@@ -599,16 +623,24 @@ static const struct drm_mode_config_funcs
simpledrm_mode_config_funcs = {
*/
static struct drm_display_mode simpledrm_mode(unsigned int width,
- unsigned int height)
+ unsigned int height,
+ u16 width_mm,
+ u16 height_mm)
{
/*
- * Assume a monitor resolution of 96 dpi to
- * get a somewhat reasonable screen size.
+ * Assume a monitor resolution of 96 dpi if physical
+ * dimensions are not specified to get a somewhat reasonable
Please move 'dimensions' to the previous line to make it more pleasant
to the eyes.
+ * screen size.
*/
+
const struct drm_display_mode mode = {
- DRM_MODE_INIT(60, width, height,
- DRM_MODE_RES_MM(width, 96ul),
- DRM_MODE_RES_MM(height, 96ul))
+ DRM_MODE_INIT(
+ 60,
+ width,
+ height,
+ (width_mm ? width_mm : DRM_MODE_RES_MM(width, 96ul)),
+ (height_mm ? height_mm : DRM_MODE_RES_MM(height, 96ul))
+ )
The coding style is awkward and the ?: doesn't belong here. Please see
further below.
};
return mode;
@@ -622,6 +654,7 @@ static struct simpledrm_device
*simpledrm_device_create(struct drm_driver *drv,
struct simpledrm_device *sdev;
struct drm_device *dev;
int width, height, stride;
+ u16 width_mm, height_mm;
Init those two variables to zero.
const struct drm_format_info *format;
struct resource *res, *mem;
void __iomem *screen_base;
@@ -676,6 +709,8 @@ static struct simpledrm_device
*simpledrm_device_create(struct drm_driver *drv,
format = simplefb_get_format_of(dev, of_node);
if (IS_ERR(format))
return ERR_CAST(format);
+ width_mm = simplefb_get_width_mm_of(dev, of_node);
+ height_mm = simplefb_get_height_mm_of(dev, of_node);
} else {
drm_err(dev, "no simplefb configuration found\n");
return ERR_PTR(-ENODEV);
@@ -686,7 +721,7 @@ static struct simpledrm_device
*simpledrm_device_create(struct drm_driver *drv,
return ERR_PTR(-EINVAL);
}
Just like with the framebuffer stride, here's the place to detect
default values. So at this point, do something like
if (!width_mm)
width_mm = DRM_MODE_RES_MM(width, 96ul);
if (!height_mm)
height_mm = DRM_MODE_RES_MM(height, 96ul);
And pass the initialized physical dimensions to simpldrm_mode(). You can
move the comment in simpledrm_mode() before the branches.
Best regards
Thomas
- sdev->mode = simpledrm_mode(width, height);
+ sdev->mode = simpledrm_mode(width, height, width_mm, height_mm);
sdev->format = format;
sdev->pitch = stride;
Thanks for the feedback! I'll improve on this patch and write
documentation to hopefully make this mainline-ready.
--
Rayyan Ansari
https://ansari.sh
