Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
This makes driver use standard property name for the reset gpio
("reset-gpios" vs "gpios-reset"), however there is a quirk in gpiolib
to also recognize the legacy name and keep compatibility with older
DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com>
---
All preparation gpiolib work to handle legacy names and polarity quirks
has landed in mainline...
drivers/video/backlight/hx8357.c | 82 ++++++++++++++------------------
1 file changed, 37 insertions(+), 45 deletions(-)
diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
index 9b50bc96e00f..a93e14adb846 100644
--- a/drivers/video/backlight/hx8357.c
+++ b/drivers/video/backlight/hx8357.c
@@ -6,11 +6,12 @@
*/
#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/lcd.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/spi/spi.h>
#define HX8357_NUM_IM_PINS 3
@@ -83,8 +84,8 @@
#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
struct hx8357_data {
- unsigned im_pins[HX8357_NUM_IM_PINS];
- unsigned reset;
+ struct gpio_desc *im_pins[HX8357_NUM_IM_PINS];
+ struct gpio_desc *reset;
struct spi_device *spi;
int state;
bool use_im_pins;
@@ -321,11 +322,11 @@ static void hx8357_lcd_reset(struct lcd_device *lcdev)
struct hx8357_data *lcd = lcd_get_data(lcdev);
/* Reset the screen */
- gpio_set_value(lcd->reset, 1);
+ gpiod_set_value_cansleep(lcd->reset, 0);
usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 0);
+ gpiod_set_value_cansleep(lcd->reset, 1);
usleep_range(10000, 12000);
- gpio_set_value(lcd->reset, 1);
+ gpiod_set_value_cansleep(lcd->reset, 0);
/* The controller needs 120ms to recover from reset */
msleep(120);
@@ -341,9 +342,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
* wires
*/
if (lcd->use_im_pins) {
- gpio_set_value_cansleep(lcd->im_pins[0], 1);
- gpio_set_value_cansleep(lcd->im_pins[1], 0);
- gpio_set_value_cansleep(lcd->im_pins[2], 1);
+ gpiod_set_value_cansleep(lcd->im_pins[0], 1);
+ gpiod_set_value_cansleep(lcd->im_pins[1], 0);
+ gpiod_set_value_cansleep(lcd->im_pins[2], 1);
}
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
@@ -601,48 +602,39 @@ static int hx8357_probe(struct spi_device *spi)
if (!match || !match->data)
return -EINVAL;
- lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
- if (!gpio_is_valid(lcd->reset)) {
- dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
- return -EINVAL;
- }
-
- ret = devm_gpio_request_one(&spi->dev, lcd->reset,
- GPIOF_OUT_INIT_HIGH,
- "hx8357-reset");
+ lcd->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(lcd->reset);
if (ret) {
- dev_err(&spi->dev,
- "failed to request gpio %d: %d\n",
- lcd->reset, ret);
- return -EINVAL;
+ dev_err(&spi->dev, "failed to request reset gpio: %d\n", ret);
+ return ret;
}
- if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
- lcd->use_im_pins = 1;
-
- for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
- lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
- "im-gpios", i);
- if (lcd->im_pins[i] == -EPROBE_DEFER) {
- dev_info(&spi->dev, "GPIO requested is not here
yet, deferring the probe\n");
- return -EPROBE_DEFER;
- }
- if (!gpio_is_valid(lcd->im_pins[i])) {
- dev_err(&spi->dev, "Missing dt property:
im-gpios\n");
- return -EINVAL;
+ gpiod_set_consumer_name(lcd->reset, "hx8357-reset");
+
+ for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+ lcd->im_pins[i] = devm_gpiod_get_index(&spi->dev,
+ "im", i, GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(lcd->im_pins[i]);
+ if (ret) {
+ if (ret == -ENOENT) {
+ if (i == 0)
+ break;
+ dev_err(&spi->dev, "Missing im gpios[%d]\n", i);
+ ret = -EINVAL;
+ } if (ret == -EPROBE_DEFER) {
+ dev_info(&spi->dev, "im gpio[%d] is not here
yet, deferring the probe\n",
+ i);
+ } else {
+ dev_err(&spi->dev, "failed to request im
gpio[%d]: %d\n",
+ i, ret);
}
- ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
- GPIOF_OUT_INIT_LOW,
- "im_pins");
- if (ret) {
- dev_err(&spi->dev, "failed to request gpio %d:
%d\n",
- lcd->im_pins[i], ret);
- return -EINVAL;
- }
+ return ret;
}
- } else {
- lcd->use_im_pins = 0;
+
+ gpiod_set_consumer_name(lcd->im_pins[i], "im_pins");
+
+ lcd->use_im_pins = true;
}
lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
--
2.39.1.456.gfc5497dd1b-goog
