Hi, On Tue, Mar 28, 2023 at 09:28:19PM +0200, Frank Oltmanns wrote: > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -819,6 +819,34 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder > *encoder) > regulator_disable(dsi->regulator); > } > > +static bool sun6i_dsi_encoder_mode_fixup( > + struct drm_encoder *encoder, > + const struct drm_display_mode *mode, > + struct drm_display_mode *adjusted_mode)
So, mode_fixup is kind of deprecated in favour of atomic_check
> +{
> + if (encoder->encoder_type == DRM_MODE_ENCODER_DSI) {
> + /*
> + * For DSI the PLL rate has to respect the bits per pixel and
> + * number of lanes.
> + *
> + * According to the BSP code:
> + * PLL rate = DOTCLOCK * bpp / lanes
> + *
> + * Therefore, the clock has to be adjusted in order to set the
> + * correct PLL rate when actually setting the clock.
> + */
> + struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
> + struct mipi_dsi_device *device = dsi->device;
> + u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
> + u8 lanes = device->lanes;
> +
> + adjusted_mode->crtc_clock = mode->crtc_clock
> + * bpp / (lanes * SUN6I_DSI_TCON_DIV);
And that's visible to the userspace, so it's not where we should store
that value. I guess the best way to do something similar would be to
store it into crtc_state, and then reuse it there. But it starts to make
a lot of rather complicated code compared to your previous patch.
Maxime
signature.asc
Description: PGP signature
