The Nokia 770 is using GPIOs from the global numberspace to pass down to the LCD controller. This regresses when we let the OMAP GPIO driver use dynamic GPIO base.
As this is the only user of LCD MIPID we can easily augment the driver to use a GPIO descriptor instead and resolve the issue. The platform data .shutdown() callback wasn't even used in the code, but we encode a shutdown asserting RESET in the remove() callback for completeness sake. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- arch/arm/mach-omap1/board-nokia770.c | 23 ++++++++++------------- drivers/video/fbdev/omap/lcd_mipid.c | 10 ++++++++++ include/linux/platform_data/lcd-mipid.h | 2 -- 3 files changed, 20 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index eb7652670447..509afcd42823 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -85,26 +85,23 @@ static struct platform_device *nokia770_devices[] __initdata = { &nokia770_kp_device, }; -static void mipid_shutdown(struct mipid_platform_data *pdata) -{ - if (pdata->nreset_gpio != -1) { - printk(KERN_INFO "shutdown LCD\n"); - gpio_set_value(pdata->nreset_gpio, 0); - msleep(120); - } -} - -static struct mipid_platform_data nokia770_mipid_platform_data = { - .shutdown = mipid_shutdown, -}; +static struct mipid_platform_data nokia770_mipid_platform_data = { }; static const struct omap_lcd_config nokia770_lcd_config __initconst = { .ctrl_name = "hwa742", }; +static struct gpiod_lookup_table nokia770_lcd_gpio_table = { + .dev_id = "lcd_mipid", + .table = { + GPIO_LOOKUP("gpio-0-15", 13, "reset", GPIO_ACTIVE_LOW), + { } + }, +}; + static void __init mipid_dev_init(void) { - nokia770_mipid_platform_data.nreset_gpio = 13; + gpiod_add_lookup_table(&nokia770_lcd_gpio_table); nokia770_mipid_platform_data.data_lines = 16; omapfb_set_lcd_config(&nokia770_lcd_config); diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c index 03cff39d392d..e4a7f0b824ff 100644 --- a/drivers/video/fbdev/omap/lcd_mipid.c +++ b/drivers/video/fbdev/omap/lcd_mipid.c @@ -7,6 +7,7 @@ */ #include <linux/device.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> #include <linux/spi/spi.h> @@ -41,6 +42,7 @@ struct mipid_device { when we can issue the next sleep in/out command */ unsigned long hw_guard_wait; /* max guard time in jiffies */ + struct gpio_desc *reset; struct omapfb_device *fbdev; struct spi_device *spi; @@ -556,6 +558,12 @@ static int mipid_spi_probe(struct spi_device *spi) return -ENOMEM; } + /* This will de-assert RESET if active */ + md->reset = gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(md->reset)) + return dev_err_probe(&spi->dev, PTR_ERR(md->reset), + "no reset GPIO line\n"); + spi->mode = SPI_MODE_0; md->spi = spi; dev_set_drvdata(&spi->dev, md); @@ -574,6 +582,8 @@ static void mipid_spi_remove(struct spi_device *spi) { struct mipid_device *md = dev_get_drvdata(&spi->dev); + /* Asserts RESET */ + gpiod_set_value(md->reset, 1); mipid_disable(&md->panel); kfree(md); } diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); -- 2.34.1