Hi,Doug: Sorry, the first patch is missed the modification of clock rate / blanking periods, I set it as Not Applicable in patchwork. The blanking periods are modified because the iniatal code increases the Vertical.
I will send V2 version update Commit message, thanks you. On Mon, May 8, 2023 at 10:28 PM Doug Anderson <diand...@google.com> wrote: > Hi, > > On Sat, May 6, 2023 at 2:32 AM Cong Yang > <yangco...@huaqin.corp-partner.google.com> wrote: > > > > Optimize flickering problem and power off sequence GOP timing at sleep > in mode. > > When display sleep in raise the potential of all GOP signals to VGHO and > then > > lower to GND. > > > > Signed-off-by: Cong Yang <yangco...@huaqin.corp-partner.google.com> > > --- > > .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 397 +++++++++++------- > > 1 file changed, 235 insertions(+), 162 deletions(-) > > You sent two different patches with the exact same subject and the > same description but completely different contents. I can't land that. > > Options: > > 1. Send a two-patch series where each patch has a different subject / > description. > > 2. Since these both touch the same file and (presumably) are trying to > address the same issue, just combine them into one patch and send > that. > > Please make sure you document everything the patch is doing. I don't > think anything in the description explains why you need to change the > clock rate / blanking periods. > > -Doug >
