This is a series of changes for DSI to enable command mode support for DSC v1.2.
This includes: 1) Rounding up `hdisplay / 3` in dsc_timing_setup() 2) Adjusting pclk_rate to account for compression 3) Fixing incorrect uses of slice_count in DSI DSC calculations 4) Setting the DATA_COMPRESS bit when DSC is enabled With these changes (and the dependency below), DSC v1.2 should work over DSI in command mode. Note: Changes that add DSC v1.2 support for video mode will be posted with the DP support changes. Depends-on: - "add DSC 1.2 dpu supports" [1] - "Introduce MSM-specific DSC helpers" [2] - "drm/msm/dsi: use mult_frac for pclk_bpp calculation" [3] [1] https://patchwork.freedesktop.org/series/116789/ [2] https://patchwork.freedesktop.org/series/115833/ [3] https://patchwork.freedesktop.org/patch/538273/?series=118072&rev=1 Signed-off-by: Jessica Zhang <quic_jessz...@quicinc.com> --- Changes in v5: - Added newline before enable_compression() function pointer definition - Rebased on top of "drm/msm/dsi: use mult_frac for pclk_bpp calculation" - Reworded commit messages for clarity - Dropped mentions of "soft slice" in commit messages - "slice_per_packet" -> "slice_per_pkt" - Picked up reviewed-by tags - Link to v4: https://lore.kernel.org/r/20230405-add-dsc-support-v4-0-15daf84f8...@quicinc.com Changes in v4: - Clarified slice_per_pkt comment regarding pkt_per_line calculations - Reworded commit message for "drm/msm/dsi: Remove incorrect references to slice_count" - Wrapped INTF_SC7280_MASK macro definition in parentheses - Fixed incorrect commit hash in "msm/drm/dsi: Round up DSC hdisplay calculation" - Picked up Reviewed-by tag - Link to v3: https://lore.kernel.org/r/20230405-add-dsc-support-v3-0-6e1d35a20...@quicinc.com Changes in v3: - Added fix to round up hdisplay DSC adjustment - Fixed inconsistent whitespace in dpu_hw_intf_ops comment doc - Moved placement of dpu_hw_intf_enable_compression - Picked up "drm/msm/dsi: Fix calculation for pkt_per_line" patch and squashed all slice_count fixes into a single patch - Use drm_mode_vrefresh() to calculate adjusted pclk rate - Moved compressed pclk adjustment to dsi_adjust_compressed_pclk() helper - Rebased changes on top of updated dependencies - Reworded commit message for "drm/msm/dpu: Set DATA_COMPRESS for command mode" for clarity - Removed revision changelog in commit messages - Link to v2: https://lore.kernel.org/r/20230405-add-dsc-support-v2-0-1072c70e9...@quicinc.com Changes in v2: - Changed has_data_compress dpu_cap to a DATA_COMPRESS INTF feature flag - Changed pclk math to only divide hdisplay by compression ratio - Reworded word count TODO comment - Make DATA_COMPRESS an INTF flag - Read INTF_CONFIG2 before writing to DATA_COMPRESS bit - Fixed whitespace issue in macro definition - Removed `inline` from dpu_hw_intf_enable_compression declaration - Only set dpu_hw_intf_ops.data_compress if DATA_COMPRESS feature is set - Reworded commit messages and cover letter for clarity - Link to v1: https://lore.kernel.org/r/20230405-add-dsc-support-v1-0-6bc6f03ae...@quicinc.com --- Jessica Zhang (5): msm/drm/dsi: Round up DSC hdisplay calculation drm/msm/dsi: Adjust pclk rate for compression drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag for DPU >= 7.0 drm/msm/dpu: Set DATA_COMPRESS on command mode for DCE/DSC 1.2 drm/msm/dsi: Remove incorrect references to slice_count .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 3 ++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 3 +- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 2 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 13 ++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h | 3 ++ drivers/gpu/drm/msm/dsi/dsi_host.c | 49 +++++++++++++++------- 6 files changed, 58 insertions(+), 15 deletions(-) --- base-commit: 12a0bf73039bd760c5e78d08109882aa628cce8c change-id: 20230405-add-dsc-support-fe130ba49841 Best regards, -- Jessica Zhang <quic_jessz...@quicinc.com>
