On Thu, Sep 26, 2013 at 04:21:36PM +0530, Archit Taneja wrote:
> Hi,
>
> On Friday 20 September 2013 04:41 AM, Russell King wrote:
>> The correct way for a driver to specify the coherent DMA mask is
>> not to directly access the field in the struct device, but to use
>> dma_set_coherent_mask(). Only arch and bus code should access this
>> member directly.
>>
>> Convert all direct write accesses to using the correct API.
>>
>> Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
>> ---
>> drivers/ata/pata_ixp4xx_cf.c | 5 ++++-
>> drivers/gpu/drm/exynos/exynos_drm_drv.c | 6 +++++-
>> drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++--
>> 3 files changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
>> index 1ec53f8..ddf470c 100644
>> --- a/drivers/ata/pata_ixp4xx_cf.c
>> +++ b/drivers/ata/pata_ixp4xx_cf.c
>> @@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device
>> *pdev)
>> struct ata_host *host;
>> struct ata_port *ap;
>> struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
>> + int ret;
>>
>> cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> @@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device
>> *pdev)
>> return -ENOMEM;
>>
>> /* acquire resources and fill host */
>> - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
>> + if (ret)
>> + return ret;
>>
>> data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
>> data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index bb82ef7..81192d0 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -286,7 +286,11 @@ static struct drm_driver exynos_drm_driver = {
>>
>> static int exynos_drm_platform_probe(struct platform_device *pdev)
>> {
>> - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> + int ret;
>> +
>> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
>> + if (ret)
>> + return ret;
>>
>> return drm_platform_init(&exynos_drm_driver, pdev);
>> }
>> diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
>> b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
>> index acf6678..701c4c1 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
>> @@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev)
>> }
>>
>> /* set dma mask for device */
>> - /* NOTE: this is a workaround for the hwmod not initializing properly */
>> - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> + ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
>> + if (ret)
>> + goto fail;
>
> Tested with omapdrm on omap4 panda es board.
Just wish to make sure - that's code for:
Tested-by: Archit Taneja <arc...@ti.com>
to be added?
Thanks.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
