On 2023-07-19 01:06:03, Dmitry Baryshkov wrote: > On 19/07/2023 00:24, Marijn Suijten wrote: > > SM6125 is identical to SM6375 except that while downstream also defines > > a throttle clock, its presence results in timeouts whereas SM6375 > > requires it to not observe any timeouts. This is represented by > > reducing the clock array length to 6 so that it cannot be passed. Note > > that any SoC other than SM6375 (currently SC7180 and SM6350) are > > unconstrained and could either pass or leave out this "throttle" clock. > > Could you please describe, what kind of timeouts do you observe? Is this > the DSI underruns issue?
Ping-pong timeouts and low(er) framerate. However, they were previosuly not happening on a random boot out of tens... and now I can no longer reproduce the timeout on 4 consecutive boots after adding the throttle clock. Could it perhaps be the power domains and opps that we added in v2 and v3? We previously discussed in DMs that the rate was bouncing between 25MHz and 403MHz without the clock specified, and with it it it got set at 385 or 403MHz. Now, a month or so later, repeatedly running this command shows 25MHz when the panel is not being refreshed, and between 337 and 403MHz on modetest -r -v: sony-pdx201 ~ $ sudo ./debugcc -p sm6125 gcc_disp_throttle_core_clk gcc_disp_throttle_core_clk: 337.848277MHz (337848277Hz) Either all these boots are flukes, or it is really fixed and this patch should be revised... > If so, it might be fixed by the MDSS > interconnect fix ([1]). > > [1] https://patchwork.freedesktop.org/series/116576/ Might have an effect but I don't have any interconnects defined in this SoC DT yet. - Marijn > > Reviewed-by: Rob Herring <r...@kernel.org> > > Signed-off-by: Marijn Suijten <marijn.suij...@somainline.org> > > --- > > .../devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml | 14 > > ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml > > b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml > > index 630b11480496..37f66940c5e3 100644 > > --- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml > > @@ -15,6 +15,7 @@ properties: > > compatible: > > enum: > > - qcom,sc7180-dpu > > + - qcom,sm6125-dpu > > - qcom,sm6350-dpu > > - qcom,sm6375-dpu > > > > @@ -73,6 +74,19 @@ allOf: > > clock-names: > > minItems: 7 > > > > + - if: > > + properties: > > + compatible: > > + const: qcom,sm6125-dpu > > + > > + then: > > + properties: > > + clocks: > > + maxItems: 6 > > + > > + clock-names: > > + maxItems: 6 > > + > > examples: > > - | > > #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > > > > -- > With best wishes > Dmitry >