On Thu, 10 Aug 2023 16:41:15 +0200, Luca Ceresoli wrote: > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" > 480x800 panel based on it. > > Signed-off-by: Luca Ceresoli <luca.ceres...@bootlin.com> > > --- > > Changes in v2: > - remove T: line form MAINTAINERS entry > - reference spi-peripheral-props.yaml > - add 'maxItems: 1' to reg > - use unevaluatedProperties > - remove out of scope backlight node > --- > .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 68 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810144116.855951-2-luca.ceres...@bootlin.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
