To get better accuration, use pixel clock rate to calculate lbcc instead of
lane_mbps since the pixel clock rate is in KHz while lane_mbps is in MHz.
Without this, distorted image can be seen on a HDMI monitor connected with
i.MX93 11x11 EVK through ADV7535 DSI to HDMI bridge in 1920x1080p@60 video
mode.
Signed-off-by: Liu Ying <victor....@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
---
v2->v3:
* Add Neil's R-b tag from v1.
v1->v2:
* No change.
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index b2da803c9de7..18e7d64b0216 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -12,6 +12,7 @@
#include <linux/component.h>
#include <linux/debugfs.h>
#include <linux/iopoll.h>
+#include <linux/math64.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -764,8 +765,15 @@ static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct
dw_mipi_dsi *dsi,
u32 hcomponent)
{
u32 frac, lbcc;
+ int bpp;
- lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+ bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+ if (bpp < 0) {
+ dev_err(dsi->dev, "failed to get bpp\n");
+ return 0;
+ }
+
+ lbcc = div_u64((u64)hcomponent * mode->clock * bpp, dsi->lanes * 8);
frac = lbcc % mode->clock;
lbcc = lbcc / mode->clock;
--
2.37.1
