On Wed, 23 Aug 2023 10:14:59 +0200, Krzysztof Kozlowski wrote: > The panel-common schema does not define what "ports" property is, so > bring the definition by referencing the panel-common-dual.yaml. Panels > can be single- or dual-link, thus require only one port@0. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org> > > --- > > Changes since v2: > 1. Use panel-common-dual > > Changes since v1: > 1. Rework to add ports to device schema, not to panel-common. > --- > .../devicetree/bindings/display/panel/novatek,nt35950.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) >
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/novatek,nt35950.example.dtb: panel@0: False schema does not allow {'compatible': ['sharp,ls055d1sx04', 'novatek,nt35950'], 'reg': [[0]], 'backlight': [[4294967295]], 'reset-gpios': [[4294967295, 94, 0]], 'avdd-supply': [[4294967295]], 'avee-supply': [[4294967295]], 'dvdd-supply': [[4294967295]], 'vddio-supply': [[4294967295]], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port@0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]]}}, 'port@1': {'reg': [[1]], 'endpoint': {'remote-endpoint': [[4294967295]]}}}, '$nodename': ['panel@0']} from schema $id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230823081500.84005-2-krzysztof.kozlow...@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
