On Fri, Aug 18, 2023 at 07:41:45AM -0500, Adam Ford wrote:
> On Sun, Aug 13, 2023 at 1:06 PM Biju Das <biju.das...@bp.renesas.com> wrote:
> >
> > As per spec, it is allowed to pulse the HPD signal to indicate that the
> > EDID information has changed. Some monitors do this when they wake up
> > from standby or are enabled. When the HPD goes low the adv7511 is
> > reset and the outputs are disabled which might cause the monitor to
> > go to standby again. To avoid this we ignore the HPD pin for the
> > first few seconds after enabling the output. On the other hand,
> > adv7535 require to enable HPD Override bit for proper HPD.
> >
> > Add hpd_override_enable feature bit to struct adv7511_chip_info to handle
> > this scenario.
> >
> > While at it, drop the enum adv7511_type as it is unused.
>
> It seems like dropping adv7511_type is unrelated to the rest of the
> patch, and I think it should be split from this into its own patch
Dropping the enum with its last user makes sense, but I think the series
may go a bit too far by adding to the info structure bits that don't
really describe logical features, but are half made up for the sole
purpose of dropping the enum. I would prefer keeping the enum for the
handful of places where a type check makes more sense (in my opinion).
> > Signed-off-by: Biju Das <biju.das...@bp.renesas.com>
> > ---
> > drivers/gpu/drm/bridge/adv7511/adv7511.h | 8 +-------
> > drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++-------
> > 2 files changed, 6 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 627531f48f84..c523ac4c9bc8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -325,22 +325,16 @@ struct adv7511_video_config {
> > struct hdmi_avi_infoframe avi_infoframe;
> > };
> >
> > -enum adv7511_type {
> > - ADV7511,
> > - ADV7533,
> > - ADV7535,
> > -};
> > -
> > #define ADV7511_MAX_ADDRS 3
> >
> > struct adv7511_chip_info {
> > - enum adv7511_type type;
> > unsigned long max_mode_clock;
> > unsigned long max_lane_freq;
> > const char * const *supply_names;
> > unsigned int num_supplies;
> > unsigned has_dsi:1;
> > unsigned link_config:1;
> > + unsigned hpd_override_enable:1;
> > };
> >
> > struct adv7511 {
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index 6974c267b1d5..7b06a0a21685 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -354,7 +354,7 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
> > * first few seconds after enabling the output. On the other hand
> > * adv7535 require to enable HPD Override bit for proper HPD.
> > */
> > - if (adv7511->info->type == ADV7535)
> > + if (adv7511->info->hpd_override_enable)
> > regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> > ADV7535_REG_POWER2_HPD_OVERRIDE,
> > ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -381,7 +381,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> > static void __adv7511_power_off(struct adv7511 *adv7511)
> > {
> > /* TODO: setup additional power down modes */
> > - if (adv7511->info->type == ADV7535)
> > + if (adv7511->info->hpd_override_enable)
> > regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
> > ADV7535_REG_POWER2_HPD_OVERRIDE, 0);
> >
> > @@ -682,7 +682,7 @@ adv7511_detect(struct adv7511 *adv7511, struct
> > drm_connector *connector)
> > status = connector_status_disconnected;
> > } else {
> > /* Renable HPD sensing */
> > - if (adv7511->info->type == ADV7535)
> > + if (adv7511->info->hpd_override_enable)
> > regmap_update_bits(adv7511->regmap,
> > ADV7511_REG_POWER2,
> > ADV7535_REG_POWER2_HPD_OVERRIDE,
> > ADV7535_REG_POWER2_HPD_OVERRIDE);
> > @@ -1360,14 +1360,12 @@ static void adv7511_remove(struct i2c_client *i2c)
> > }
> >
> > static const struct adv7511_chip_info adv7511_chip_info = {
> > - .type = ADV7511,
> > .supply_names = adv7511_supply_names,
> > .num_supplies = ARRAY_SIZE(adv7511_supply_names),
> > .link_config = 1
> > };
> >
> > static const struct adv7511_chip_info adv7533_chip_info = {
> > - .type = ADV7533,
> > .max_mode_clock = 80000,
> > .max_lane_freq = 800000,
> > .supply_names = adv7533_supply_names,
> > @@ -1376,12 +1374,12 @@ static const struct adv7511_chip_info
> > adv7533_chip_info = {
> > };
> >
> > static const struct adv7511_chip_info adv7535_chip_info = {
> > - .type = ADV7535,
> > .max_mode_clock = 148500,
> > .max_lane_freq = 891000,
> > .supply_names = adv7533_supply_names,
> > .num_supplies = ARRAY_SIZE(adv7533_supply_names),
> > - .has_dsi = 1
> > + .has_dsi = 1,
> > + .hpd_override_enable = 1
> > };
> >
> > static const struct i2c_device_id adv7511_i2c_ids[] = {
--
Regards,
Laurent Pinchart
