By at least strong convention, a print-buffer's trailing newline says
"message complete, send it".  The exception (no TNL, followed by a call
to pr_cont) proves the general rule.

Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG,
1288 drm_dbg.  Clean up the remainders, in maintainer sized chunks.

No functional changes.

Signed-off-by: Jim Cromie <jim.cro...@gmail.com>
---
 drivers/gpu/drm/kmb/kmb_crtc.c  | 10 +++++-----
 drivers/gpu/drm/kmb/kmb_plane.c |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c
index 647872f65bff..a58baf25322d 100644
--- a/drivers/gpu/drm/kmb/kmb_crtc.c
+++ b/drivers/gpu/drm/kmb/kmb_crtc.c
@@ -94,7 +94,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc,
        vm.hback_porch = 0;
        vm.hsync_len = 28;
 
-       drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d 
h-active=%d h-bp=%d h-fp=%d hsync-l=%d",
+       drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d 
h-active=%d h-bp=%d h-fp=%d hsync-l=%d\n",
                __func__, __LINE__,
                        m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch,
                        vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
@@ -194,24 +194,24 @@ static enum drm_mode_status
        int vfp = mode->vsync_start - mode->vdisplay;
 
        if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) {
-               drm_dbg(dev, "height = %d less than %d",
+               drm_dbg(dev, "height = %d less than %d\n",
                        mode->vdisplay, KMB_CRTC_MAX_HEIGHT);
                return MODE_BAD_VVALUE;
        }
        if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) {
-               drm_dbg(dev, "width = %d less than %d",
+               drm_dbg(dev, "width = %d less than %d\n",
                        mode->hdisplay, KMB_CRTC_MAX_WIDTH);
                return MODE_BAD_HVALUE;
        }
        refresh = drm_mode_vrefresh(mode);
        if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) {
-               drm_dbg(dev, "refresh = %d less than %d or greater than %d",
+               drm_dbg(dev, "refresh = %d less than %d or greater than %d\n",
                        refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH);
                return MODE_BAD;
        }
 
        if (vfp < KMB_CRTC_MIN_VFP) {
-               drm_dbg(dev, "vfp = %d less than %d", vfp, KMB_CRTC_MIN_VFP);
+               drm_dbg(dev, "vfp = %d less than %d\n", vfp, KMB_CRTC_MIN_VFP);
                return MODE_BAD;
        }
 
diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index 9e0562aa2bcb..308bd1cb50c8 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -78,7 +78,7 @@ static unsigned int check_pixel_format(struct drm_plane 
*plane, u32 format)
         * plane configuration is not supported.
         */
        if (init_disp_cfg.format && init_disp_cfg.format != format) {
-               drm_dbg(&kmb->drm, "Cannot change format after initial plane 
configuration");
+               drm_dbg(&kmb->drm, "Cannot change format after initial plane 
configuration\n");
                return -EINVAL;
        }
        for (i = 0; i < plane->format_count; i++) {
@@ -124,7 +124,7 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
        if ((init_disp_cfg.width && init_disp_cfg.height) &&
            (init_disp_cfg.width != fb->width ||
            init_disp_cfg.height != fb->height)) {
-               drm_dbg(&kmb->drm, "Cannot change plane height or width after 
initial configuration");
+               drm_dbg(&kmb->drm, "Cannot change plane height or width after 
initial configuration\n");
                return -EINVAL;
        }
        can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
@@ -375,7 +375,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
        spin_lock_irq(&kmb->irq_lock);
        if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
                spin_unlock_irq(&kmb->irq_lock);
-               drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning");
+               drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning\n");
                return;
        }
        spin_unlock_irq(&kmb->irq_lock);
-- 
2.41.0

Reply via email to