Start to improve the scheduler document. Especially document the lifetime of each of the objects as well as the restrictions around DMA-fence handling and userspace compatibility.
Signed-off-by: Christian König <christian.koe...@amd.com> --- drivers/gpu/drm/scheduler/sched_main.c | 126 ++++++++++++++++++++----- 1 file changed, 104 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c index 506371c42745..36a7c5dc852d 100644 --- a/drivers/gpu/drm/scheduler/sched_main.c +++ b/drivers/gpu/drm/scheduler/sched_main.c @@ -24,28 +24,110 @@ /** * DOC: Overview * - * The GPU scheduler provides entities which allow userspace to push jobs - * into software queues which are then scheduled on a hardware run queue. - * The software queues have a priority among them. The scheduler selects the entities - * from the run queue using a FIFO. The scheduler provides dependency handling - * features among jobs. The driver is supposed to provide callback functions for - * backend operations to the scheduler like submitting a job to hardware run queue, - * returning the dependencies of a job etc. - * - * The organisation of the scheduler is the following: - * - * 1. Each hw run queue has one scheduler - * 2. Each scheduler has multiple run queues with different priorities - * (e.g., HIGH_HW,HIGH_SW, KERNEL, NORMAL) - * 3. Each scheduler run queue has a queue of entities to schedule - * 4. Entities themselves maintain a queue of jobs that will be scheduled on - * the hardware. - * - * The jobs in a entity are always scheduled in the order that they were pushed. - * - * Note that once a job was taken from the entities queue and pushed to the - * hardware, i.e. the pending queue, the entity must not be referenced anymore - * through the jobs entity pointer. + * The GPU scheduler implements some logic to decide which command submission + * to push next to the hardware. Another major use case for the GPU scheduler + * is to enforce correct driver behavior around those command submission. + * Because of this it's also used by drivers which don't need the actual + * scheduling functionality. + * + * To fulfill this task the GPU scheduler uses of the following objects: + * + * 1. The job object which contains a bunch of dependencies in the form of + * DMA-fence objects. Drivers can also implement an optional prepare_job + * callback which returns additional dependencies as DMA-fence objects. + * It's important to note that this callback must follow the DMA-fence rules, + * so it can't easily allocate memory or grab locks under which memory is + * allocated. Drivers should use this as base class for an object which + * contains the necessary state to push the command submission to the + * hardware. + * + * The lifetime of the job object should at least be from pushing it into the + * scheduler until the scheduler notes through the free callback that a job + * isn't needed any more. Drivers can of course keep their job object alive + * longer than that, but that's outside of the scope of the scheduler + * component. Job initialization is split into two parts, + * drm_sched_job_init() and drm_sched_job_arm(). It's important to note that + * after arming a job drivers must follow the DMA-fence rules and can't + * easily allocate memory or takes locks under which memory is allocated. + * + * 2. The entity object which is a container for jobs which should execute + * sequentially. Drivers should create an entity for each individual context + * they maintain for command submissions which can run in parallel. + * + * The lifetime of the entity should *not* exceed the lifetime of the + * userspace process it was created for and drivers should call the + * drm_sched_entity_flush() function from their file_operations.flush + * callback. Background is that for compatibility reasons with existing + * userspace all results of a command submission should become visible + * externally even after after a process exits. The only exception to that + * is when the process is actively killed by a SIGKILL. In this case the + * entity object makes sure that jobs are freed without running them while + * still maintaining correct sequential order for signaling fences. So it's + * possible that an entity object is not alive any more while jobs from it + * are still running on the hardware. + * + * 3. The hardware fence object which is a DMA-fence provided by the driver as + * result of running jobs. Drivers need to make sure that the normal + * DMA-fence semantics are followed for this object. It's important to note + * that the memory for this object can *not* be allocated in the run_job + * callback since that would violate the requirements for the DMA-fence + * implementation. The scheduler maintains a timeout handler which triggers + * if this fence doesn't signal in a configurable time frame. + * + * The lifetime of this object follows DMA-fence ref-counting rules, the + * scheduler takes ownership of the reference returned by the driver and + * drops it when it's not needed any more. Errors should also be signaled + * through the hardware fence and are bubbled up back to the scheduler fence + * and entity. + * + * 4. The scheduler fence object which encapsulates the whole time from pushing + * the job into the scheduler until the hardware has finished processing it. + * This is internally managed by the scheduler, but drivers can grab + * additional reference to it after arming a job. The implementation + * provides DMA-fence interfaces for signaling both scheduling of a command + * submission as well as finishing of processing. + * + * The lifetime of this object also follows normal DMA-fence ref-counting + * rules. The finished fence is the one normally exposed outside of the + * scheduler, but the driver can grab references to both the scheduled as + * well as the finished fence when needed for pipe-lining optimizations. + * + * 5. The run queue object which is a container of entities for a certain + * priority level. The lifetime of those objects are bound to the scheduler + * lifetime. + * + * This is internally managed by the scheduler and drivers shouldn't touch + * them directly. + * + * 6. The scheduler object itself which does the actual work of selecting a job + * and pushing it to the hardware. Both FIFO and RR selection algorithm are + * supported, but FIFO is preferred for many use cases. + * + * The lifetime of this object is managed by the driver using it. Before + * destroying the scheduler the driver must ensure that all hardware + * processing involving this scheduler object has finished by calling for + * example disable_irq(). It is *not* sufficient to wait for the hardware + * fence here since this doesn't guarantee that all callback processing has + * finished. + * + * All callbacks the driver needs to implement are restricted by DMA-fence + * signaling rules to guarantee deadlock free forward progress. This especially + * means that for normal operation no memory can be allocated. All memory which + * is needed for pushing the job to the hardware must be allocated before + * arming a job. It also means that no locks can be taken under which memory + * might be allocated as well. + * + * Memory which is optional to allocate for device core dumping or debugging + * *must* be allocated with GFP_NOWAIT and appropriate error handling taking if + * that allocation fails. GFP_ATOMIC should only be used if absolutely + * necessary since dipping into the special atomic reserves is usually not + * justified for a GPU driver. + * + * The scheduler also used to provided functionality for re-submitting jobs + * with replacing the hardware fence during reset handling. This functionality + * is now marked as deprecated since this has proven to be fundamentally racy + * and not compatible with DMA-fence rules and shouldn't be used in any new + * code. */ #include <linux/kthread.h> -- 2.34.1