Hi Am 13.11.23 um 16:25 schrieb Jocelyn Falempe:
On 13/11/2023 09:50, Thomas Zimmermann wrote:Return the ast chip and config in the detection function's parameters instead of storing them directly in the ast device instance.Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de> --- drivers/gpu/drm/ast/ast_main.c | 104 ++++++++++++++++++--------------- 1 file changed, 57 insertions(+), 47 deletions(-)diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.cindex f100df8d74f71..331a9a861153b 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -76,25 +76,27 @@ static void ast_open_key(void __iomem *ioregs)__ast_write8_i(ioregs, AST_IO_VGACRI, 0x80, AST_IO_VGACR80_PASSWORD);} -static int ast_device_config_init(struct ast_device *ast) +static int ast_detect_chip(struct pci_dev *pdev, + void __iomem *regs, void __iomem *ioregs, + enum ast_chip *chip_out, + enum ast_config_mode *config_mode_out) { - struct drm_device *dev = &ast->base; - struct pci_dev *pdev = to_pci_dev(dev->dev); - struct device_node *np = dev->dev->of_node; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + enum ast_config_mode config_mode = ast_use_defaults; uint32_t scu_rev = 0xffffffff; + enum ast_chip chip; u32 data; - u8 jregd0, jregd1; + u8 vgacrd0, vgacrd1; /* * Find configuration mode and read SCU revision */ - ast->config_mode = ast_use_defaults; - /* Check if we have device-tree properties */if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) {/* We do, disable P2A access */ - ast->config_mode = ast_use_dt; + config_mode = ast_use_dt; scu_rev = data;} else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge/*@@ -102,9 +104,9 @@ static int ast_device_config_init(struct ast_device *ast)* is disabled. We force using P2A if VGA only mode bit * is set D[7] */ - jregd0 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff); - jregd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff); - if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { + vgacrd0 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd0); + vgacrd1 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd1); + if (!(vgacrd0 & 0x80) || !(vgacrd1 & 0x10)) { /* * We have a P2A bridge and it is enabled.@@ -112,32 +114,32 @@ static int ast_device_config_init(struct ast_device *ast)/* Patch AST2500/AST2510 */ if ((pdev->revision & 0xf0) == 0x40) { - if (!(jregd0 & AST_VRAM_INIT_STATUS_MASK)) - ast_patch_ahb_2500(ast->regs); + if (!(vgacrd0 & AST_VRAM_INIT_STATUS_MASK)) + ast_patch_ahb_2500(regs); } /* Double check that it's actually working */ - data = ast_read32(ast, 0xf004); + data = __ast_read32(regs, 0xf004); if ((data != 0xffffffff) && (data != 0x00)) { - ast->config_mode = ast_use_p2a; + config_mode = ast_use_p2a; /* Read SCU7c (silicon revision register) */ - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - scu_rev = ast_read32(ast, 0x1207c); + __ast_write32(regs, 0xf004, 0x1e6e0000); + __ast_write32(regs, 0xf000, 0x1); + scu_rev = __ast_read32(regs, 0x1207c); } } } - switch (ast->config_mode) { + switch (config_mode) { case ast_use_defaults: - drm_info(dev, "Using default configuration\n"); + dev_info(dev, "Using default configuration\n"); break; case ast_use_dt: - drm_info(dev, "Using device-tree for configuration\n"); + dev_info(dev, "Using device-tree for configuration\n"); break; case ast_use_p2a: - drm_info(dev, "Using P2A bridge for configuration\n"); + dev_info(dev, "Using P2A bridge for configuration\n"); break; }@@ -146,63 +148,66 @@ static int ast_device_config_init(struct ast_device *ast)*/ if (pdev->revision >= 0x50) { - ast->chip = AST2600; - drm_info(dev, "AST 2600 detected\n"); + chip = AST2600; + dev_info(dev, "AST 2600 detected\n");Adding a macro to set chip and printk could be handy here: something like #define set_chip(version) \ chip = version; \ dev_info(dev, "%s detected\n", #version); \ and then set_chip(AST2510)
I was thinking about reworking these messages at some point. Maybe have a single print somewhere in the code.
} else if (pdev->revision >= 0x40) { switch (scu_rev & 0x300) { case 0x0100: - ast->chip = AST2510; - drm_info(dev, "AST 2510 detected\n"); + chip = AST2510; + dev_info(dev, "AST 2510 detected\n"); break; default: - ast->chip = AST2500; - drm_info(dev, "AST 2500 detected\n"); + chip = AST2500; + dev_info(dev, "AST 2500 detected\n");Should the default case have break ?This one has no break, but later in this function they do. Maybe we can have more consistency ?
Sure, of course. Best regards Thomas
} } else if (pdev->revision >= 0x30) { switch (scu_rev & 0x300) { case 0x0100: - ast->chip = AST1400; - drm_info(dev, "AST 1400 detected\n"); + chip = AST1400; + dev_info(dev, "AST 1400 detected\n"); break; default: - ast->chip = AST2400; - drm_info(dev, "AST 2400 detected\n"); + chip = AST2400; + dev_info(dev, "AST 2400 detected\n"); } } else if (pdev->revision >= 0x20) { switch (scu_rev & 0x300) { case 0x0000: - ast->chip = AST1300; - drm_info(dev, "AST 1300 detected\n"); + chip = AST1300; + dev_info(dev, "AST 1300 detected\n"); break; default: - ast->chip = AST2300; - drm_info(dev, "AST 2300 detected\n"); + chip = AST2300; + dev_info(dev, "AST 2300 detected\n"); break; } } else if (pdev->revision >= 0x10) { switch (scu_rev & 0x0300) { case 0x0200: - ast->chip = AST1100; - drm_info(dev, "AST 1100 detected\n"); + chip = AST1100; + dev_info(dev, "AST 1100 detected\n"); break; case 0x0100: - ast->chip = AST2200; - drm_info(dev, "AST 2200 detected\n"); + chip = AST2200; + dev_info(dev, "AST 2200 detected\n"); break; case 0x0000: - ast->chip = AST2150; - drm_info(dev, "AST 2150 detected\n"); + chip = AST2150; + dev_info(dev, "AST 2150 detected\n"); break; default: - ast->chip = AST2100; - drm_info(dev, "AST 2100 detected\n"); + chip = AST2100; + dev_info(dev, "AST 2100 detected\n"); break; } } else { - ast->chip = AST2000; - drm_info(dev, "AST 2000 detected\n"); + chip = AST2000; + dev_info(dev, "AST 2000 detected\n"); } + *chip_out = chip; + *config_mode_out = config_mode; + return 0; }@@ -431,6 +436,8 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,int ret = 0; void __iomem *regs; void __iomem *ioregs; + enum ast_config_mode config_mode; + enum ast_chip chip; ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base); if (IS_ERR(ast))@@ -502,10 +509,13 @@ struct ast_device *ast_device_create(const struct drm_driver *drv,if (ret) return ERR_PTR(ret); - ret = ast_device_config_init(ast); + ret = ast_detect_chip(pdev, regs, ioregs, &chip, &config_mode); if (ret) return ERR_PTR(ret); + ast->chip = chip; + ast->config_mode = config_mode; + ast_detect_widescreen(ast); ast_detect_tx_chip(ast, need_post);Thanks for your patch, Best regards,
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)
OpenPGP_signature.asc
Description: OpenPGP digital signature