On Thu, Jan 18, 2024 at 01:48:43PM -0800, Yury Norov wrote:
On Thu, Jan 18, 2024 at 02:42:12PM -0600, Lucas De Marchi wrote:
Hi,
Reviving this thread as now with xe driver merged we have 2 users for
a fixed-width BIT/GENMASK.
Can you point where and why?
See users of REG_GENMASK and REG_BIT in drivers/gpu/drm/i915 and
drivers/gpu/drm/xe. I think the register definition in the xe shows it
in a good way:
drivers/gpu/drm/xe/regs/xe_gt_regs.h
The GPU registers are mostly 32-bit wide. We don't want to accidently do
something like below (s/30/33/ added for illustration purposes):
#define LSC_CHICKEN_BIT_0 XE_REG_MCR(0xe7c8)
#define DISABLE_D8_D16_COASLESCE REG_BIT(33)
Same thing for GENMASK family of macros and for registers that are 16 or
8 bits. See e.g. drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
On Wed, Jun 21, 2023 at 07:20:59PM -0700, Yury Norov wrote:
> Hi Lucas, all!
>
> (Thanks, Andy, for pointing to this thread.)
>
> On Mon, May 08, 2023 at 10:14:02PM -0700, Lucas De Marchi wrote:
> > Add GENMASK_U32(), GENMASK_U16() and GENMASK_U8() macros to create
> > masks for fixed-width types and also the corresponding BIT_U32(),
> > BIT_U16() and BIT_U8().
>
> Can you split BIT() and GENMASK() material to separate patches?
>
> > All of those depend on a new "U" suffix added to the integer constant.
> > Due to naming clashes it's better to call the macro U32. Since C doesn't
> > have a proper suffix for short and char types, the U16 and U18 variants
> > just use U32 with one additional check in the BIT_* macros to make
> > sure the compiler gives an error when the those types overflow.
>
> I feel like I don't understand the sentence...
>
> > The BIT_U16() and BIT_U8() need the help of GENMASK_INPUT_CHECK(),
> > as otherwise they would allow an invalid bit to be passed. Hence
> > implement them in include/linux/bits.h rather than together with
> > the other BIT* variants.
>
> I don't think it's a good way to go because BIT() belongs to a more basic
> level than GENMASK(). Not mentioning possible header dependency issues.
> If you need to test against tighter numeric region, I'd suggest to
> do the same trick as GENMASK_INPUT_CHECK() does, but in uapi/linux/const.h
> directly. Something like:
> #define _U8(x) (CONST_GT(U8_MAX, x) + _AC(x, U))
but then make uapi/linux/const.h include linux/build_bug.h?
I was thinking about leaving BIT() define where it is, and add the
fixed-width versions in this header. I was thinking uapi/linux/const.h
was more about allowing the U/ULL suffixes for things shared with asm.
You can't include kernel headers in uapi code. But you can try doing
vice-versa: implement or move the pieces you need to share to the
uapi/linux/const.h, and use them in the kernel code.
but in this CONST_GE() should trigger a BUG/static_assert
on U8_MAX < x. AFAICS that check can't be on the uapi/ side,
so there's nothing much left to change in uapi/linux/const.h.
I'd expect drivers to be the primary user of these fixed-width BIT
variants, hence the proposal to do in include/linux/bits.h.
Ssomething like this WIP/untested diff (on top of your previous patch):
diff --git a/include/linux/bits.h b/include/linux/bits.h
index cb94128171b2..409cd10f7597 100644
--- a/include/linux/bits.h
+++ b/include/linux/bits.h
@@ -24,12 +24,16 @@
#define GENMASK_INPUT_CHECK(h, l) \
(BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
__is_constexpr((l) > (h)), (l) > (h), 0)))
+#define BIT_INPUT_CHECK(type, b) \
+ ((BUILD_BUG_ON_ZERO(__builtin_choose_expr( \
+ __is_constexpr(b), (b) >= BITS_PER_TYPE(type), 0))))
#else
/*
* BUILD_BUG_ON_ZERO is not available in h files included from asm files,
* disable the input check if that is the case.
*/
#define GENMASK_INPUT_CHECK(h, l) 0
+#define BIT_INPUT_CHECK(type, b) 0
#endif
#define __GENMASK(t, h, l) \
@@ -44,4 +48,9 @@
#define GENMASK_U32(h, l) __GENMASK(u32, h, l)
#define GENMASK_U64(h, l) __GENMASK(u64, h, l)
+#define BIT_U8(b) (u8)(BIT_INPUT_CHECK(u8, b) + BIT(b))
+#define BIT_U16(b) (u16)(BIT_INPUT_CHECK(u16, b) + BIT(b))
+#define BIT_U32(b) (u32)(BIT_INPUT_CHECK(u32, b) + BIT(b))
+#define BIT_U64(b) (u64)(BIT_INPUT_CHECK(u64, b) + BIT(b))
+
#endif /* __LINUX_BITS_H */
In the worst case, you can just implement the macro you need in the
uapi header, and make it working that way.
Can you confirm that my proposal increases the kernel size? If so, is
there any way to fix it? If it doesn't, I'd prefer to use the
__GENMASK() approach.
I agree on continuing with your approach. The bloat-o-meter indeed
showed almost no difference. `size ....i915.o` on the other hand
increased, but then decreased when I replaced our current REG_GENMASK()
implementation to reuse the new GENMASK_U*()
$ # test-genmask.00: before any change
$ # test-genmask.01: after your patch to GENMASK
$ # test-genmask.01: after converting
drivers/gpu/drm/i915/i915_reg_defs.h
to use the new macros
$ size build64/drivers/gpu/drm/i915/i915.o-test-genmask.*
text data bss dec hex filename
4506628 215083 7168 4728879 48282f
build64/drivers/gpu/drm/i915/i915.o-test-genmask.00
4511084 215083 7168 4733335 483997
build64/drivers/gpu/drm/i915/i915.o-test-genmask.01
4493292 215083 7168 4715543 47f417
build64/drivers/gpu/drm/i915/i915.o-test-genmask.02
$ ./scripts/bloat-o-meter
build64/drivers/gpu/drm/i915/i915.o-test-genmask.0[01]
add/remove: 0/0 grow/shrink: 2/1 up/down: 4/-5 (-1)
Function old new delta
intel_drrs_activate 399 402 +3
intel_psr_invalidate 546 547 +1
intel_psr_flush 880 875 -5
Total: Before=2980530, After=2980529, chg -0.00%
$ ./scripts/bloat-o-meter
build64/drivers/gpu/drm/i915/i915.o-test-genmask.0[12]
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=2980529, After=2980529, chg +0.00%
thanks
Lucas De Marchi
Thanks,
Yury