From: Liviu Dudau <liviu.du...@arm.com> Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU.
Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by: Liviu Dudau <liviu.du...@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski...@linaro.org> Cc: Rob Herring <robh...@kernel.org> Cc: Conor Dooley <conor...@kernel.org> Cc: devicet...@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezil...@collabora.com> --- .../bindings/gpu/arm,mali-valhall-csf.yaml | 147 ++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml new file mode 100644 index 000000000000..be1f6bacc3f3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali Valhall GPU + +maintainers: + - Liviu Dudau <liviu.du...@arm.com> + - Boris Brezillon <boris.brezil...@collabora.com> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + oneOf: + - items: + - enum: + - rockchip,rk3588-mali + - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + interrupts: + items: + - description: Job interrupt + - description: MMU interrupt + - description: GPU interrupt + + interrupt-names: + items: + - const: job + - const: mmu + - const: gpu + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core + - const: coregroup + - const: stacks + + mali-supply: true + + operating-points-v2: true + opp-table: + type: object + + power-domains: + minItems: 1 + maxItems: 5 + + power-domain-names: + minItems: 1 + maxItems: 5 + + sram-supply: true + + "#cooling-cells": + const: 2 + + dynamic-power-coefficient: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the GPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - mali-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-mali + then: + properties: + clocks: + minItems: 3 + power-domains: + maxItems: 1 + power-domain-names: false + +examples: + - | + #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3588-power.h> + + gpu: gpu@fb000000 { + compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf"; + reg = <0xfb000000 0x200000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + clock-names = "core", "coregroup", "stacks"; + clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>, + <&cru CLK_GPU_STACKS>; + power-domains = <&power RK3588_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; + mali-supply = <&vdd_gpu_s0>; + sram-supply = <&vdd_gpu_mem_s0>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <675000 675000 850000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <675000 675000 850000>; + }; + }; + +... -- 2.43.0