On 29.01.2024 11:23, Manikandan Muralidharan wrote:
> Add support for the following DPI mode if the encoder type
> is DSI as per the XLCDC IP datasheet:
> - 16BPPCFG1
> - 16BPPCFG2
> - 16BPPCFG3
> - 18BPPCFG1
> - 18BPPCFG2
> - 24BPP
>
> Signed-off-by: Manikandan Muralidharan <manikanda...@microchip.com>
> [durai.manicka...@microchip.com: update output format using is_xlcdc flag]
> Signed-off-by: Durai Manickam KR <durai.manicka...@microchip.com>
> ---
> .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 123 +++++++++++++-----
> 1 file changed, 88 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 1899be2eb6a3..6f529769b036 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -295,11 +295,18 @@ static void atmel_hlcdc_crtc_atomic_enable(struct
> drm_crtc *c,
>
> }
>
> -#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
> -#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
> -#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
> -#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
> -#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
> +#define ATMEL_HLCDC_RGB444_OUTPUT BIT(0)
> +#define ATMEL_HLCDC_RGB565_OUTPUT BIT(1)
> +#define ATMEL_HLCDC_RGB666_OUTPUT BIT(2)
> +#define ATMEL_HLCDC_RGB888_OUTPUT BIT(3)
> +#define ATMEL_HLCDC_DPI_RGB565C1_OUTPUT BIT(4)
> +#define ATMEL_HLCDC_DPI_RGB565C2_OUTPUT BIT(5)
> +#define ATMEL_HLCDC_DPI_RGB565C3_OUTPUT BIT(6)
> +#define ATMEL_HLCDC_DPI_RGB666C1_OUTPUT BIT(7)
> +#define ATMEL_HLCDC_DPI_RGB666C2_OUTPUT BIT(8)
> +#define ATMEL_HLCDC_DPI_RGB888_OUTPUT BIT(9)
> +#define ATMEL_HLCDC_OUTPUT_MODE_MASK GENMASK(3, 0)
> +#define ATMEL_XLCDC_OUTPUT_MODE_MASK GENMASK(9, 0)
>
> static int atmel_hlcdc_connector_output_mode(struct drm_connector_state
> *state)
> {
> @@ -313,53 +320,99 @@ static int atmel_hlcdc_connector_output_mode(struct
> drm_connector_state *state)
> if (!encoder)
> encoder = connector->encoder;
>
> - switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> - case 0:
> - break;
> - case MEDIA_BUS_FMT_RGB444_1X12:
> - return ATMEL_HLCDC_RGB444_OUTPUT;
> - case MEDIA_BUS_FMT_RGB565_1X16:
> - return ATMEL_HLCDC_RGB565_OUTPUT;
> - case MEDIA_BUS_FMT_RGB666_1X18:
> - return ATMEL_HLCDC_RGB666_OUTPUT;
> - case MEDIA_BUS_FMT_RGB888_1X24:
> - return ATMEL_HLCDC_RGB888_OUTPUT;
> - default:
> - return -EINVAL;
> - }
> -
> - for (j = 0; j < info->num_bus_formats; j++) {
> - switch (info->bus_formats[j]) {
> - case MEDIA_BUS_FMT_RGB444_1X12:
> - supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
To generate less diff here and have a cleaner code you can move all this
DSI specific code in a different function and have here something like:
if (encoder->encoder_type == DRM_MODE_ENCODER_DSI)
return atmel_hlcdc_connector_output_dsi();
> + if (encoder->encoder_type == DRM_MODE_ENCODER_DSI) {
> + /*
> + * atmel-hlcdc to support DSI formats with DSI video pipeline
> + * when DRM_MODE_ENCODER_DSI type is set by
> + * connector driver component.
> + */
> + switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> + case 0:
> break;
> case MEDIA_BUS_FMT_RGB565_1X16:
> - supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
> case MEDIA_BUS_FMT_RGB666_1X18:
> - supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
> + case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
> + return ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
> case MEDIA_BUS_FMT_RGB888_1X24:
> - supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> - break;
> + return ATMEL_HLCDC_DPI_RGB888_OUTPUT;
> default:
> + return -EINVAL;
> + }
> +
> + for (j = 0; j < info->num_bus_formats; j++) {
> + switch (info->bus_formats[j]) {
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB565C1_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB666C1_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB666C2_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + supported_fmts |=
> + ATMEL_HLCDC_DPI_RGB888_OUTPUT;
> + break;
> + default:
> + break;
> + }
> + }
> + } else {
> + switch (atmel_hlcdc_encoder_get_bus_fmt(encoder)) {
> + case 0:
> break;
> + case MEDIA_BUS_FMT_RGB444_1X12:
> + return ATMEL_HLCDC_RGB444_OUTPUT;
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + return ATMEL_HLCDC_RGB565_OUTPUT;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + return ATMEL_HLCDC_RGB666_OUTPUT;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + return ATMEL_HLCDC_RGB888_OUTPUT;
> + default:
> + return -EINVAL;
> }
> - }
>
> + for (j = 0; j < info->num_bus_formats; j++) {
> + switch (info->bus_formats[j]) {
> + case MEDIA_BUS_FMT_RGB444_1X12:
> + supported_fmts |= ATMEL_HLCDC_RGB444_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + supported_fmts |= ATMEL_HLCDC_RGB565_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + supported_fmts |= ATMEL_HLCDC_RGB666_OUTPUT;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + supported_fmts |= ATMEL_HLCDC_RGB888_OUTPUT;
> + break;
> + default:
> + break;
> + }
> + }
> + }
> return supported_fmts;
> }
>
> static int atmel_hlcdc_crtc_select_output_mode(struct drm_crtc_state *state)
> {
> - unsigned int output_fmts = ATMEL_HLCDC_OUTPUT_MODE_MASK;
> + unsigned int output_fmts;
> struct atmel_hlcdc_crtc_state *hstate;
> struct drm_connector_state *cstate;
> struct drm_connector *connector;
> - struct atmel_hlcdc_crtc *crtc;
> + struct atmel_hlcdc_crtc *crtc =
> drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
Previous code uses reverse christmass tree order for variable, thus, try to
keep it the same.
> int i;
> + bool is_xlcdc = crtc->dc->desc->is_xlcdc;
>
> - crtc = drm_crtc_to_atmel_hlcdc_crtc(state->crtc);
> + output_fmts = is_xlcdc ? ATMEL_XLCDC_OUTPUT_MODE_MASK :
> + ATMEL_HLCDC_OUTPUT_MODE_MASK;
>
> for_each_new_connector_in_state(state->state, connector, cstate, i) {
> unsigned int supported_fmts = 0;
> @@ -380,7 +433,7 @@ static int atmel_hlcdc_crtc_select_output_mode(struct
> drm_crtc_state *state)
>
> hstate = drm_crtc_state_to_atmel_hlcdc_crtc_state(state);
> hstate->output_mode = fls(output_fmts) - 1;
> - if (crtc->dc->desc->is_xlcdc) {
> + if (is_xlcdc) {
> /* check if MIPI DPI bit needs to be set */
> if (fls(output_fmts) > 3) {
> hstate->output_mode -= 4;
