Hi all,
Here are v4 patches to improve tc358775 driver and add support for
tc358765.
Regards,
Tony
Changes since v3:
- Fixed dts binding warnings
Changes since v2:
- Only make stby-gpios optional for tc358775, and disallow them for
tc358765 as noted by Krzysztof
- Added additionalProperties: false for port-base as noted by Krzysztof
- Updated patch description for why there can be a data-lanes property
for both the DSI host and the bridge as noted by Dmitry
- Improved the old dtb data-lanes warning as suggested by Michael
- Fix warning on casting of_device_get_match_data() as noted by the
kernel test robot
Changes since v1:
- After a brief offline discussion with Michael, merge series with
Michael's patch series to make stby gpio and supplies optional as they
may be hardwired
- Use Michael's better patch for the jeida timings change
- Parse lanes on the bridge side like other bridge devices do, and if not
found, also parse on the DSI host side and warn
Michael Walle (3):
dt-bindings: display: bridge: tc358775: make stby gpio optional
drm/bridge: tc358775: fix support for jeida-18 and jeida-24
drm/bridge: tc358775: make standby GPIO optional
Tony Lindgren (7):
dt-bindings: display: bridge: tc358775: Add data-lanes
dt-bindings: display: bridge: tc358775: Add support for tc358765
drm/bridge: tc358775: Get bridge data lanes instead of the DSI host
lanes
drm/bridge: tc358775: Add burst and low-power modes
drm/bridge: tc358775: Enable pre_enable_prev_first flag
drm/bridge: tc358775: Add support for tc358765
drm/bridge: tc358775: Configure hs_rate and lp_rate
.../display/bridge/toshiba,tc358775.yaml | 39 ++++++--
drivers/gpu/drm/bridge/tc358775.c | 98 ++++++++++++-------
2 files changed, 94 insertions(+), 43 deletions(-)
--
2.43.1
