On 26/02/24 05:46, Louis Chauvet wrote:
> Re-introduce a line-by-line composition algorithm for each pixel format.
> This allows more performance by not requiring an indirection per pixel
> read. This patch is focused on readability of the code.
>
> Line-by-line composition was introduced by [1] but rewritten back to
> pixel-by-pixel algorithm in [2]. At this time, nobody noticed the impact
> on performance, and it was merged.
>
> This patch is almost a revert of [2], but in addition efforts have been
> made to increase readability and maintainability of the rotation handling.
> The blend function is now divided in two parts:
> - Transformation of coordinates from the output referential to the source
> referential
> - Line conversion and blending
>
> Most of the complexity of the rotation management is avoided by using
> drm_rect_* helpers. The remaining complexity is around the clipping, to
> avoid reading/writing outside source/destination buffers.
>
> The pixel conversion is now done line-by-line, so the read_pixel_t was
> replaced with read_pixel_line_t callback. This way the indirection is only
> required once per line and per plane, instead of once per pixel and per
> plane.
>
> The read_line_t callbacks are very similar for most pixel format, but it
> is required to avoid performance impact. Some helpers were created to
> avoid code repetition:
> - get_step_1x1: get the step in byte to reach next pixel block in a
> certain direction
> - *_to_argb_u16: helpers to perform colors conversion. They should be
> inlined by the compiler, and they are used to avoid repetition between
> multiple variants of the same format (argb/xrgb and maybe in the
> future for formats like bgr formats).
>
> This new algorithm was tested with:
> - kms_plane (for color conversions)
> - kms_rotation_crc (for rotations of planes)
> - kms_cursor_crc (for translations of planes)
> The performance gain was mesured with:
> - kms_fb_stress
>
> [1]: commit 8ba1648567e2 ("drm: vkms: Refactor the plane composer to accept
> new formats")
>
> https://lore.kernel.org/all/20220905190811.25024-7-igormtorre...@gmail.com/
> [2]: commit 322d716a3e8a ("drm/vkms: isolate pixel conversion
> functionality")
> https://lore.kernel.org/all/20230418130525.128733-2-mca...@igalia.com/
>
> Signed-off-by: Louis Chauvet <louis.chau...@bootlin.com>
> ---
> drivers/gpu/drm/vkms/vkms_composer.c | 219 +++++++++++++++++++++++-------
> drivers/gpu/drm/vkms/vkms_drv.h | 24 +++-
> drivers/gpu/drm/vkms/vkms_formats.c | 253
> ++++++++++++++++++++++-------------
> drivers/gpu/drm/vkms/vkms_formats.h | 2 +-
> drivers/gpu/drm/vkms/vkms_plane.c | 8 +-
> 5 files changed, 349 insertions(+), 157 deletions(-)
>
> diff --git a/drivers/gpu/drm/vkms/vkms_composer.c
> b/drivers/gpu/drm/vkms/vkms_composer.c
> index 5b341222d239..e555bf9c1aee 100644
> --- a/drivers/gpu/drm/vkms/vkms_composer.c
> +++ b/drivers/gpu/drm/vkms/vkms_composer.c
> @@ -24,9 +24,10 @@ static u16 pre_mul_blend_channel(u16 src, u16 dst, u16
> alpha)
>
> /**
> * pre_mul_alpha_blend - alpha blending equation
> - * @frame_info: Source framebuffer's metadata
> * @stage_buffer: The line with the pixels from src_plane
> * @output_buffer: A line buffer that receives all the blends output
> + * @x_start: The start offset to avoid useless copy
> + * @count: The number of byte to copy
> *
> * Using the information from the `frame_info`, this blends only the
> * necessary pixels from the `stage_buffer` to the `output_buffer`
> @@ -37,51 +38,23 @@ static u16 pre_mul_blend_channel(u16 src, u16 dst, u16
> alpha)
> * drm_plane_create_blend_mode_property(). Also, this formula assumes a
> * completely opaque background.
> */
> -static void pre_mul_alpha_blend(struct vkms_frame_info *frame_info,
> - struct line_buffer *stage_buffer,
> - struct line_buffer *output_buffer)
> +static void pre_mul_alpha_blend(
> + struct line_buffer *stage_buffer,
> + struct line_buffer *output_buffer,
> + int x_start,
> + int pixel_count)
> {
> - int x_dst = frame_info->dst.x1;
> - struct pixel_argb_u16 *out = output_buffer->pixels + x_dst;
> - struct pixel_argb_u16 *in = stage_buffer->pixels;
> - int x_limit = min_t(size_t, drm_rect_width(&frame_info->dst),
> - stage_buffer->n_pixels);
> -
> - for (int x = 0; x < x_limit; x++) {
> - out[x].a = (u16)0xffff;
> - out[x].r = pre_mul_blend_channel(in[x].r, out[x].r, in[x].a);
> - out[x].g = pre_mul_blend_channel(in[x].g, out[x].g, in[x].a);
> - out[x].b = pre_mul_blend_channel(in[x].b, out[x].b, in[x].a);
> + struct pixel_argb_u16 *out = &output_buffer->pixels[x_start];
> + struct pixel_argb_u16 *in = &stage_buffer->pixels[x_start];
> +
> + for (int i = 0; i < pixel_count; i++) {
> + out[i].a = (u16)0xffff;
> + out[i].r = pre_mul_blend_channel(in[i].r, out[i].r, in[i].a);
> + out[i].g = pre_mul_blend_channel(in[i].g, out[i].g, in[i].a);
> + out[i].b = pre_mul_blend_channel(in[i].b, out[i].b, in[i].a);
> }
> }
>
> -static int get_y_pos(struct vkms_frame_info *frame_info, int y)
> -{
> - if (frame_info->rotation & DRM_MODE_REFLECT_Y)
> - return drm_rect_height(&frame_info->rotated) - y - 1;
> -
> - switch (frame_info->rotation & DRM_MODE_ROTATE_MASK) {
> - case DRM_MODE_ROTATE_90:
> - return frame_info->rotated.x2 - y - 1;
> - case DRM_MODE_ROTATE_270:
> - return y + frame_info->rotated.x1;
> - default:
> - return y;
> - }
> -}
> -
> -static bool check_limit(struct vkms_frame_info *frame_info, int pos)
> -{
> - if (drm_rotation_90_or_270(frame_info->rotation)) {
> - if (pos >= 0 && pos < drm_rect_width(&frame_info->rotated))
> - return true;
> - } else {
> - if (pos >= frame_info->rotated.y1 && pos <
> frame_info->rotated.y2)
> - return true;
> - }
> -
> - return false;
> -}
>
> static void fill_background(const struct pixel_argb_u16 *background_color,
> struct line_buffer *output_buffer)
> @@ -163,6 +136,37 @@ static void apply_lut(const struct vkms_crtc_state
> *crtc_state, struct line_buff
> }
> }
>
> +/**
> + * direction_for_rotation() - Helper to get the correct reading direction
> for a specific rotation
> + *
> + * @rotation: rotation to analyze
> + */
> +enum pixel_read_direction direction_for_rotation(unsigned int rotation)
> +{
> + if (rotation & DRM_MODE_ROTATE_0) {
> + if (rotation & DRM_MODE_REFLECT_X)
> + return READ_LEFT;
> + else
> + return READ_RIGHT;
> + } else if (rotation & DRM_MODE_ROTATE_90) {
> + if (rotation & DRM_MODE_REFLECT_Y)
> + return READ_UP;
> + else
> + return READ_DOWN;
> + } else if (rotation & DRM_MODE_ROTATE_180) {
> + if (rotation & DRM_MODE_REFLECT_X)
> + return READ_RIGHT;
> + else
> + return READ_LEFT;
> + } else if (rotation & DRM_MODE_ROTATE_270) {
> + if (rotation & DRM_MODE_REFLECT_Y)
> + return READ_DOWN;
> + else
> + return READ_UP;
> + }
> + return READ_RIGHT;
> +}
> +
> /**
> * blend - blend the pixels from all planes and compute crc
> * @wb: The writeback frame buffer metadata
> @@ -183,11 +187,11 @@ static void blend(struct vkms_writeback_job *wb,
> {
> struct vkms_plane_state **plane = crtc_state->active_planes;
> u32 n_active_planes = crtc_state->num_active_planes;
> - int y_pos;
>
> const struct pixel_argb_u16 background_color = { .a = 0xffff };
>
> size_t crtc_y_limit = crtc_state->base.crtc->mode.vdisplay;
> + size_t crtc_x_limit = crtc_state->base.crtc->mode.hdisplay;
>
> /*
> * The planes are composed line-by-line. It is a necessary complexity
> to avoid poor
> @@ -198,22 +202,133 @@ static void blend(struct vkms_writeback_job *wb,
>
> /* The active planes are composed associatively in z-order. */
> for (size_t i = 0; i < n_active_planes; i++) {
> - y_pos = get_y_pos(plane[i]->frame_info, y);
> + struct vkms_plane_state *current_plane = plane[i];
>
> - if (!check_limit(plane[i]->frame_info, y_pos))
> + /* Avoid rendering useless lines */
> + if (y < current_plane->frame_info->dst.y1 ||
> + y >= current_plane->frame_info->dst.y2) {
> continue;
> -
> - vkms_compose_row(stage_buffer, plane[i], y_pos);
> - pre_mul_alpha_blend(plane[i]->frame_info, stage_buffer,
> - output_buffer);
> + }
> +
> + /*
> + * src_px is the line to copy. The initial coordinates
> are inside the
So maybe is better to rename to src_line?
Best Regards,
~Arthur Grillo
> + * destination framebuffer, and then drm_rect_* helpers
> are used to
> + * compute the correct position into the source
> framebuffer.
> + */
> + struct drm_rect src_px = DRM_RECT_INIT(
> + current_plane->frame_info->dst.x1, y,
> +
> drm_rect_width(¤t_plane->frame_info->dst), 1);
> + struct drm_rect tmp_src;
> +
> + drm_rect_fp_to_int(&tmp_src,
> ¤t_plane->frame_info->src);
> +
> + /*
> + * [1]: Clamping src_px to the crtc_x_limit to avoid
> writing outside of the
> + * destination buffer
> + */
> + src_px.x2 = min_t(int, src_px.x2, (int)crtc_x_limit);
> +
> + /*
> + * Transform the coordinate x/y from the crtc to
> coordinates into
> + * coordinates for the src buffer.
> + *
> + * - Cancel the offset of the dst buffer.
> + * - Invert the rotation. This assumes that
> + * dst = drm_rect_rotate(src, rotation) (dst and src
> have the
> + * same size, but can be rotated).
> + * - Apply the offset of the source rectangle to the
> coordinate.
> + */
> + drm_rect_translate(&src_px,
> -current_plane->frame_info->dst.x1,
> + -current_plane->frame_info->dst.y1);
> + drm_rect_rotate_inv(&src_px,
> + drm_rect_width(&tmp_src),
> + drm_rect_height(&tmp_src),
> +
> current_plane->frame_info->rotation);
> + drm_rect_translate(&src_px, tmp_src.x1, tmp_src.y1);
> +
> + /* Get the correct reading direction in the source
> buffer. */
> +
> + enum pixel_read_direction direction =
> +
> direction_for_rotation(current_plane->frame_info->rotation);
> +
> + int x_start = src_px.x1;
> + int y_start = src_px.y1;
> + int pixel_count;
> + /* [2]: Compute and clamp the number of pixel to read */
> + if (direction == READ_RIGHT || direction == READ_LEFT) {
> + /*
> + * In horizontal reading, the src_px width is
> the number of pixel to
> + * read
> + */
> + pixel_count = drm_rect_width(&src_px);
> + if (x_start < 0) {
> + pixel_count += x_start;
> + x_start = 0;
> + }
> + if (x_start + pixel_count >
> current_plane->frame_info->fb->width) {
> + pixel_count =
> +
> (int)current_plane->frame_info->fb->width - x_start;
> + }
> + } else {
> + /*
> + * In vertical reading, the src_px height is
> the number of pixel to
> + * read
> + */
> + pixel_count = drm_rect_height(&src_px);
> + if (y_start < 0) {
> + pixel_count += y_start;
> + y_start = 0;
> + }
> + if (y_start + pixel_count >
> current_plane->frame_info->fb->height) {
> + pixel_count =
> +
> (int)current_plane->frame_info->fb->width - y_start;
> + }
> + }
> +
> + if (pixel_count <= 0) {
> + /* Nothing to read, so avoid multiple function
> calls for nothing */
> + continue;
> + }
> +
> + /*
> + * Modify the starting point to take in account the
> rotation
> + *
> + * src_px is the top-left corner, so when reading
> READ_LEFT or READ_TOP, it
> + * must be changed to the top-right/bottom-left corner.
> + */
> + if (direction == READ_LEFT) {
> + // x_start is now the right point
> + x_start += pixel_count - 1;
> + } else if (direction == READ_UP) {
> + // y_start is now the bottom point
> + y_start += pixel_count - 1;
> + }
> +
> + /*
> + * Perform the conversion and the blending
> + *
> + * Here we know that the read line (x_start, y_start,
> pixel_count) is
> + * inside the source buffer [2] and we don't write
> outside the stage
> + * buffer [1]
> + */
> + current_plane->pixel_read_line(
> + current_plane->frame_info,
> + x_start,
> + y_start,
> + direction,
> + pixel_count,
> +
> &stage_buffer->pixels[current_plane->frame_info->dst.x1]);
> +
> + pre_mul_alpha_blend(stage_buffer, output_buffer,
> + current_plane->frame_info->dst.x1,
> + pixel_count);
> }
>
> apply_lut(crtc_state, output_buffer);
>
> *crc32 = crc32_le(*crc32, (void *)output_buffer->pixels,
> row_size);
> -
> if (wb)
> - vkms_writeback_row(wb, output_buffer, y_pos);
> + vkms_writeback_row(wb, output_buffer, y);
> }
> }
>
> @@ -224,7 +339,7 @@ static int check_format_funcs(struct vkms_crtc_state
> *crtc_state,
> u32 n_active_planes = crtc_state->num_active_planes;
>
> for (size_t i = 0; i < n_active_planes; i++)
> - if (!planes[i]->pixel_read)
> + if (!planes[i]->pixel_read_line)
> return -1;
>
> if (active_wb && !active_wb->pixel_write)
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 886c885c8cf5..0bf49b3c435b 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -39,7 +39,6 @@
> struct vkms_frame_info {
> struct drm_framebuffer *fb;
> struct drm_rect src, dst;
> - struct drm_rect rotated;
> struct iosys_map map[DRM_FORMAT_MAX_PLANES];
> unsigned int rotation;
> };
> @@ -69,14 +68,26 @@ struct vkms_writeback_job {
> pixel_write_t pixel_write;
> };
>
> +enum pixel_read_direction {
> + READ_UP,
> + READ_DOWN,
> + READ_LEFT,
> + READ_RIGHT
> +};
> +
> /**
> - * typedef pixel_read_t - These functions are used to read a pixel in the
> source frame,
> + * typedef pixel_read_line_t - These functions are used to read a pixel line
> in the source frame,
> * convert it to `struct pixel_argb_u16` and write it to @out_pixel.
> *
> - * @src_pixels: Pointer to the pixel to read
> - * @out_pixel: Pointer to write the converted pixel
> + * @frame_info: Frame used as source for the pixel value
> + * @y: Y (height) coordinate in the source buffer
> + * @x_start: X (width) coordinate of the first pixel to copy
> + * @x_end: X (width) coordinate of the last pixel to copy
> + * @out_pixel: Pointer where to write the pixel value. Pixels will be
> written between x_start and
> + * x_end.
> */
> -typedef void (*pixel_read_t)(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel);
> +typedef void (*pixel_read_line_t)(struct vkms_frame_info *frame_info, int
> x_start, int y_start, enum
> + pixel_read_direction direction, int count, struct pixel_argb_u16
> out_pixel[]);
>
> /**
> * vkms_plane_state - Driver specific plane state
> @@ -88,7 +99,7 @@ typedef void (*pixel_read_t)(u8 *src_pixels, struct
> pixel_argb_u16 *out_pixel);
> struct vkms_plane_state {
> struct drm_shadow_plane_state base;
> struct vkms_frame_info *frame_info;
> - pixel_read_t pixel_read;
> + pixel_read_line_t pixel_read_line;
> };
>
> struct vkms_plane {
> @@ -193,7 +204,6 @@ int vkms_verify_crc_source(struct drm_crtc *crtc, const
> char *source_name,
> /* Composer Support */
> void vkms_composer_worker(struct work_struct *work);
> void vkms_set_composer(struct vkms_output *out, bool enabled);
> -void vkms_compose_row(struct line_buffer *stage_buffer, struct
> vkms_plane_state *plane, int y);
> void vkms_writeback_row(struct vkms_writeback_job *wb, const struct
> line_buffer *src_buffer, int y);
>
> /* Writeback */
> diff --git a/drivers/gpu/drm/vkms/vkms_formats.c
> b/drivers/gpu/drm/vkms/vkms_formats.c
> index 1f5aeba57ad6..46daea6d3ee9 100644
> --- a/drivers/gpu/drm/vkms/vkms_formats.c
> +++ b/drivers/gpu/drm/vkms/vkms_formats.c
> @@ -11,21 +11,29 @@
>
> /**
> * packed_pixels_offset() - Get the offset of the block containing the pixel
> at coordinates x/y
> - * in the first plane
> *
> * @frame_info: Buffer metadata
> * @x: The x coordinate of the wanted pixel in the buffer
> * @y: The y coordinate of the wanted pixel in the buffer
> + * @plane_index: The index of the plane to use
> *
> * The caller must be aware that this offset is not always a pointer to a
> pixel. If individual
> * pixel values are needed, they have to be extracted from the resulting
> block.
> */
> -static size_t pixel_offset(const struct vkms_frame_info *frame_info, int x,
> int y)
> +static size_t packed_pixels_offset(const struct vkms_frame_info *frame_info,
> int x, int y,
> + size_t plane_index)
> {
> struct drm_framebuffer *fb = frame_info->fb;
> -
> - return fb->offsets[0] + (y * fb->pitches[0])
> - + (x * fb->format->cpp[0]);
> + const struct drm_format_info *format = frame_info->fb->format;
> + /* Directly using x and y to multiply pitches and format->ccp is not
> sufficient because
> + * in some formats a block can represent multiple pixels.
> + *
> + * Dividing x and y by the block size allows to extract the correct
> offset of the block
> + * containing the pixel.
> + */
> + return fb->offsets[plane_index] +
> + (y / drm_format_info_block_width(format, plane_index)) *
> fb->pitches[plane_index] +
> + (x / drm_format_info_block_height(format, plane_index)) *
> format->char_per_block[plane_index];
> }
>
> /**
> @@ -35,44 +43,56 @@ static size_t pixel_offset(const struct vkms_frame_info
> *frame_info, int x, int
> * @frame_info: Buffer metadata
> * @x: The x(width) coordinate inside the plane
> * @y: The y(height) coordinate inside the plane
> + * @plane_index: The index of the plane
> *
> - * Takes the information stored in the frame_info, a pair of coordinates, and
> - * returns the address of the first color channel.
> - * This function assumes the channels are packed together, i.e. a color
> channel
> - * comes immediately after another in the memory. And therefore, this
> function
> - * doesn't work for YUV with chroma subsampling (e.g. YUV420 and NV21).
> + * Takes the information stored in the frame_info, a pair of coordinates,
> and returns the address
> + * of the block containing this pixel.
> + * The caller must be aware that this pointer is sometimes not directly a
> pixel, it needs some
> + * additional work to extract pixel color from this block.
> */
> static void *packed_pixels_addr(const struct vkms_frame_info *frame_info,
> - int x, int y)
> + int x, int y, size_t plane_index)
> {
> - size_t offset = pixel_offset(frame_info, x, y);
> -
> - return (u8 *)frame_info->map[0].vaddr + offset;
> + return (u8 *)frame_info->map[0].vaddr +
> packed_pixels_offset(frame_info, x, y, plane_index);
> }
>
> -static void *get_packed_src_addr(const struct vkms_frame_info *frame_info,
> int y)
> +/**
> + * get_step_1x1() - Common helper to compute the correct step value between
> each pixel to read in a
> + * certain direction.
> + * This must be used only with format where blockh == blockw == 1.
> + * In the case when direction is not a valid pixel_read_direction, the
> returned step is 0, so you
> + * must not rely on this result to create a loop variant.
> + *
> + * @fb Framebuffer to iter on
> + * @direction Direction of the reading
> + */
> +static int get_step_1x1(struct drm_framebuffer *fb, enum
> pixel_read_direction direction,
> + int plane_index)
> {
> - int x_src = frame_info->src.x1 >> 16;
> - int y_src = y - frame_info->rotated.y1 + (frame_info->src.y1 >> 16);
> -
> - return packed_pixels_addr(frame_info, x_src, y_src);
> + switch (direction) {
> + default:
> + DRM_ERROR("Invalid direction for pixel reading: %d\n",
> direction);
> + return 0;
> + case READ_RIGHT:
> + return fb->format->char_per_block[plane_index];
> + case READ_LEFT:
> + return -fb->format->char_per_block[plane_index];
> + case READ_DOWN:
> + return (int)fb->pitches[plane_index];
> + case READ_UP:
> + return -(int)fb->pitches[plane_index];
> + }
> }
>
> -static int get_x_position(const struct vkms_frame_info *frame_info, int
> limit, int x)
> -{
> - if (frame_info->rotation & (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270))
> - return limit - x - 1;
> - return x;
> -}
>
> /*
> - * The following functions take pixel data from the buffer and convert them
> to the format
> + * The following functions take pixel data (a, r, g, b, pixel, ...),
> convert them to the format
> * ARGB16161616 in out_pixel.
> *
> - * They are used in the `vkms_compose_row` function to handle multiple
> formats.
> + * They are used in the `read_line`s functions to avoid duplicate work for
> some pixel formats.
> */
>
> -static void ARGB8888_to_argb_u16(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel)
> +static void ARGB8888_to_argb_u16(struct pixel_argb_u16 *out_pixel, int a,
> int r, int g, int b)
> {
> /*
> * The 257 is the "conversion ratio". This number is obtained by the
> @@ -80,48 +100,26 @@ static void ARGB8888_to_argb_u16(u8 *src_pixels, struct
> pixel_argb_u16 *out_pixe
> * the best color value in a pixel format with more possibilities.
> * A similar idea applies to others RGB color conversions.
> */
> - out_pixel->a = (u16)src_pixels[3] * 257;
> - out_pixel->r = (u16)src_pixels[2] * 257;
> - out_pixel->g = (u16)src_pixels[1] * 257;
> - out_pixel->b = (u16)src_pixels[0] * 257;
> -}
> -
> -static void XRGB8888_to_argb_u16(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel)
> -{
> - out_pixel->a = (u16)0xffff;
> - out_pixel->r = (u16)src_pixels[2] * 257;
> - out_pixel->g = (u16)src_pixels[1] * 257;
> - out_pixel->b = (u16)src_pixels[0] * 257;
> + out_pixel->a = (u16)a * 257;
> + out_pixel->r = (u16)r * 257;
> + out_pixel->g = (u16)g * 257;
> + out_pixel->b = (u16)b * 257;
> }
>
> -static void ARGB16161616_to_argb_u16(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel)
> +static void ARGB16161616_to_argb_u16(struct pixel_argb_u16 *out_pixel, int
> a, int r, int g, int b)
> {
> - u16 *pixels = (u16 *)src_pixels;
> -
> - out_pixel->a = le16_to_cpu(pixels[3]);
> - out_pixel->r = le16_to_cpu(pixels[2]);
> - out_pixel->g = le16_to_cpu(pixels[1]);
> - out_pixel->b = le16_to_cpu(pixels[0]);
> -}
> -
> -static void XRGB16161616_to_argb_u16(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel)
> -{
> - u16 *pixels = (u16 *)src_pixels;
> -
> - out_pixel->a = (u16)0xffff;
> - out_pixel->r = le16_to_cpu(pixels[2]);
> - out_pixel->g = le16_to_cpu(pixels[1]);
> - out_pixel->b = le16_to_cpu(pixels[0]);
> + out_pixel->a = le16_to_cpu(a);
> + out_pixel->r = le16_to_cpu(r);
> + out_pixel->g = le16_to_cpu(g);
> + out_pixel->b = le16_to_cpu(b);
> }
>
> -static void RGB565_to_argb_u16(u8 *src_pixels, struct pixel_argb_u16
> *out_pixel)
> +static void RGB565_to_argb_u16(struct pixel_argb_u16 *out_pixel, const u16
> *pixel)
> {
> - u16 *pixels = (u16 *)src_pixels;
> -
> s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31));
> s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63));
>
> - u16 rgb_565 = le16_to_cpu(*pixels);
> + u16 rgb_565 = le16_to_cpu(*pixel);
> s64 fp_r = drm_int2fixp((rgb_565 >> 11) & 0x1f);
> s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f);
> s64 fp_b = drm_int2fixp(rgb_565 & 0x1f);
> @@ -132,34 +130,105 @@ static void RGB565_to_argb_u16(u8 *src_pixels, struct
> pixel_argb_u16 *out_pixel)
> out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio));
> }
>
> -/**
> - * vkms_compose_row - compose a single row of a plane
> - * @stage_buffer: output line with the composed pixels
> - * @plane: state of the plane that is being composed
> - * @y: y coordinate of the row
> +/*
> + * The following functions are read_line function for each pixel format
> supported by VKMS.
> *
> - * This function composes a single row of a plane. It gets the source pixels
> - * through the y coordinate (see get_packed_src_addr()) and goes linearly
> - * through the source pixel, reading the pixels and converting it to
> - * ARGB16161616 (see the pixel_read() callback). For rotate-90 and
> rotate-270,
> - * the source pixels are not traversed linearly. The source pixels are
> queried
> - * on each iteration in order to traverse the pixels vertically.
> + * They read a line starting at the point @x_start,@y_start following the
> @direction. The result
> + * is stored in @out_pixel and in the format ARGB16161616.
> + *
> + * Those function are very similar, but it is required for performance
> reason. In the past, some
> + * experiment were done, and with a generic loop the performance are very
> reduced [1].
> + *
> + * [1]:
> https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b...@riseup.net/
> */
> -void vkms_compose_row(struct line_buffer *stage_buffer, struct
> vkms_plane_state *plane, int y)
> +
> +static void ARGB8888_read_line(struct vkms_frame_info *frame_info, int
> x_start, int y_start,
> + enum pixel_read_direction direction, int count,
> + struct pixel_argb_u16 out_pixel[])
> +{
> + u8 *src_pixels = packed_pixels_addr(frame_info, x_start, y_start, 0);
> +
> + int step = get_step_1x1(frame_info->fb, direction, 0);
> +
> + while (count) {
> + u8 *px = (u8 *)src_pixels;
> +
> + ARGB8888_to_argb_u16(out_pixel, px[3], px[2], px[1], px[0]);
> + out_pixel += 1;
> + src_pixels += step;
> + count--;
> + }
> +}
> +
> +static void XRGB8888_read_line(struct vkms_frame_info *frame_info, int
> x_start, int y_start,
> + enum pixel_read_direction direction, int count,
> + struct pixel_argb_u16 out_pixel[])
> +{
> + u8 *src_pixels = packed_pixels_addr(frame_info, x_start, y_start, 0);
> +
> + int step = get_step_1x1(frame_info->fb, direction, 0);
> +
> + while (count) {
> + u8 *px = (u8 *)src_pixels;
> +
> + ARGB8888_to_argb_u16(out_pixel, 255, px[2], px[1], px[0]);
> + out_pixel += 1;
> + src_pixels += step;
> + count--;
> + }
> +}
> +
> +static void ARGB16161616_read_line(struct vkms_frame_info *frame_info, int
> x_start, int y_start,
> + enum pixel_read_direction direction, int
> count,
> + struct pixel_argb_u16 out_pixel[])
> +{
> + u8 *src_pixels = packed_pixels_addr(frame_info, x_start, y_start, 0);
> +
> + int step = get_step_1x1(frame_info->fb, direction, 0);
> +
> + while (count) {
> + u16 *px = (u16 *)src_pixels;
> +
> + ARGB16161616_to_argb_u16(out_pixel, px[3], px[2], px[1], px[0]);
> + out_pixel += 1;
> + src_pixels += step;
> + count--;
> + }
> +}
> +
> +static void XRGB16161616_read_line(struct vkms_frame_info *frame_info, int
> x_start, int y_start,
> + enum pixel_read_direction direction, int
> count,
> + struct pixel_argb_u16 out_pixel[])
> +{
> + u8 *src_pixels = packed_pixels_addr(frame_info, x_start, y_start, 0);
> +
> + int step = get_step_1x1(frame_info->fb, direction, 0);
> +
> + while (count) {
> + u16 *px = (u16 *)src_pixels;
> +
> + ARGB16161616_to_argb_u16(out_pixel, 0xFFFF, px[2], px[1],
> px[0]);
> + out_pixel += 1;
> + src_pixels += step;
> + count--;
> + }
> +}
> +
> +static void RGB565_read_line(struct vkms_frame_info *frame_info, int
> x_start, int y_start,
> + enum pixel_read_direction direction, int count,
> + struct pixel_argb_u16 out_pixel[])
> {
> - struct pixel_argb_u16 *out_pixels = stage_buffer->pixels;
> - struct vkms_frame_info *frame_info = plane->frame_info;
> - u8 *src_pixels = get_packed_src_addr(frame_info, y);
> - int limit = min_t(size_t, drm_rect_width(&frame_info->dst),
> stage_buffer->n_pixels);
> + u8 *src_pixels = packed_pixels_addr(frame_info, x_start, y_start, 0);
>
> - for (size_t x = 0; x < limit; x++, src_pixels +=
> frame_info->fb->format->cpp[0]) {
> - int x_pos = get_x_position(frame_info, limit, x);
> + int step = get_step_1x1(frame_info->fb, direction, 0);
>
> - if (drm_rotation_90_or_270(frame_info->rotation))
> - src_pixels = get_packed_src_addr(frame_info, x +
> frame_info->rotated.y1)
> - + frame_info->fb->format->cpp[0] * y;
> + while (count) {
> + u16 *px = (u16 *)src_pixels;
>
> - plane->pixel_read(src_pixels, &out_pixels[x_pos]);
> + RGB565_to_argb_u16(out_pixel, px);
> + out_pixel += 1;
> + src_pixels += step;
> + count--;
> }
> }
>
> @@ -247,7 +316,7 @@ void vkms_writeback_row(struct vkms_writeback_job *wb,
> {
> struct vkms_frame_info *frame_info = &wb->wb_frame_info;
> int x_dst = frame_info->dst.x1;
> - u8 *dst_pixels = packed_pixels_addr(frame_info, x_dst, y);
> + u8 *dst_pixels = packed_pixels_addr(frame_info, x_dst, y, 0);
> struct pixel_argb_u16 *in_pixels = src_buffer->pixels;
> int x_limit = min_t(size_t, drm_rect_width(&frame_info->dst),
> src_buffer->n_pixels);
>
> @@ -256,27 +325,27 @@ void vkms_writeback_row(struct vkms_writeback_job *wb,
> }
>
> /**
> - * Retrieve the correct read_pixel function for a specific format.
> + * Retrieve the correct read_line function for a specific format.
> * The returned pointer is NULL for unsupported pixel formats. The caller
> must ensure that the
> * pointer is valid before using it in a vkms_plane_state.
> *
> * @format: 4cc of the format
> */
> -pixel_read_t get_pixel_read_function(u32 format)
> +pixel_read_line_t get_pixel_read_line_function(u32 format)
> {
> switch (format) {
> case DRM_FORMAT_ARGB8888:
> - return &ARGB8888_to_argb_u16;
> + return &ARGB8888_read_line;
> case DRM_FORMAT_XRGB8888:
> - return &XRGB8888_to_argb_u16;
> + return &XRGB8888_read_line;
> case DRM_FORMAT_ARGB16161616:
> - return &ARGB16161616_to_argb_u16;
> + return &ARGB16161616_read_line;
> case DRM_FORMAT_XRGB16161616:
> - return &XRGB16161616_to_argb_u16;
> + return &XRGB16161616_read_line;
> case DRM_FORMAT_RGB565:
> - return &RGB565_to_argb_u16;
> + return &RGB565_read_line;
> default:
> - return (pixel_read_t)NULL;
> + return (pixel_read_line_t)NULL;
> }
> }
>
> diff --git a/drivers/gpu/drm/vkms/vkms_formats.h
> b/drivers/gpu/drm/vkms/vkms_formats.h
> index 3ecea4563254..8d2bef95ff79 100644
> --- a/drivers/gpu/drm/vkms/vkms_formats.h
> +++ b/drivers/gpu/drm/vkms/vkms_formats.h
> @@ -5,7 +5,7 @@
>
> #include "vkms_drv.h"
>
> -pixel_read_t get_pixel_read_function(u32 format);
> +pixel_read_line_t get_pixel_read_line_function(u32 format);
>
> pixel_write_t get_pixel_write_function(u32 format);
>
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c
> b/drivers/gpu/drm/vkms/vkms_plane.c
> index f68b1b03d632..58c1c74742b5 100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -106,9 +106,9 @@ static void vkms_plane_atomic_update(struct drm_plane
> *plane,
> return;
>
> fmt = fb->format->format;
> - pixel_read_t pixel_read = get_pixel_read_function(fmt);
> + pixel_read_line_t pixel_read_line = get_pixel_read_line_function(fmt);
>
> - if (!pixel_read) {
> + if (!pixel_read_line) {
> DRM_WARN("Pixel format is not supported by VKMS planes. State
> is inchanged\n");
> return;
> }
> @@ -128,10 +128,8 @@ static void vkms_plane_atomic_update(struct drm_plane
> *plane,
>
> DRM_MODE_REFLECT_X |
>
> DRM_MODE_REFLECT_Y);
>
> - drm_rect_rotate(&frame_info->rotated,
> drm_rect_width(&frame_info->rotated),
> - drm_rect_height(&frame_info->rotated),
> frame_info->rotation);
>
> - vkms_plane_state->pixel_read = pixel_read;
> + vkms_plane_state->pixel_read_line = pixel_read_line;
> }
>
> static int vkms_plane_atomic_check(struct drm_plane *plane,
>
