Hi Sean,
Thank you for the patch.
On Fri, Mar 15, 2024 at 07:09:12PM -0400, Sean Anderson wrote:
> The feedback we get from the DPRX is per-lane. Make changes using this
> information, instead of picking the maximum values from all lanes. This
> results in more-consistent training on marginal links.
>
> Signed-off-by: Sean Anderson <sean.ander...@linux.dev>
> ---
>
> drivers/gpu/drm/xlnx/zynqmp_dp.c | 23 ++++++++---------------
> 1 file changed, 8 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> index 98a32e6a0459..8635b5673386 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> @@ -605,28 +605,21 @@ static void zynqmp_dp_adjust_train(struct zynqmp_dp *dp,
> u8 link_status[DP_LINK_STATUS_SIZE])
> {
> u8 *train_set = dp->train_set;
> - u8 voltage = 0, preemphasis = 0;
> u8 i;
>
> for (i = 0; i < dp->mode.lane_cnt; i++) {
> - u8 v = drm_dp_get_adjust_request_voltage(link_status, i);
> - u8 p = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
> + u8 voltage = drm_dp_get_adjust_request_voltage(link_status, i);
> + u8 preemphasis =
> + drm_dp_get_adjust_request_pre_emphasis(link_status, i);
>
> - if (v > voltage)
> - voltage = v;
> + if (voltage >= DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
> + voltage |= DP_TRAIN_MAX_SWING_REACHED;
>
> - if (p > preemphasis)
> - preemphasis = p;
> - }
> + if (preemphasis >= DP_TRAIN_PRE_EMPH_LEVEL_2)
> + preemphasis |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
>
> - if (voltage >= DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
> - voltage |= DP_TRAIN_MAX_SWING_REACHED;
> -
> - if (preemphasis >= DP_TRAIN_PRE_EMPH_LEVEL_2)
> - preemphasis |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
> -
> - for (i = 0; i < dp->mode.lane_cnt; i++)
> train_set[i] = voltage | preemphasis;
> + }
I don't have enough DP knowledge to review this :-(
> }
>
> /**
--
Regards,
Laurent Pinchart
