On Tue, Apr 02, 2024 at 01:59:25PM +0300, Alexandru Ardelean wrote: > On some HW designs, it's easier for the layout if the P/N pins are swapped. > The driver currently has a DT property to do that.
"currently", because 1/2 adds it. bindings patches should precede the driver patches in the series, so please swap the patches and remove this portion of the description. > > This change documents the 'lontium,pn-swap' property. > > Signed-off-by: Alexandru Ardelean <a...@shruggie.ro> > --- > .../devicetree/bindings/display/bridge/lontium,lt8912b.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml > b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml > index 2cef252157985..3a804926b288a 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml > @@ -24,6 +24,12 @@ properties: > maxItems: 1 > description: GPIO connected to active high RESET pin. > > + lontium,pn-swap: > + description: Swap the polarities of the P/N pins in software. > + On some HW designs, the layout is simplified if the P/N pins > + are inverted. Please explain what configuration of a board would cause these to be swapped, rather than why someone might want to configure the board this way. I've got no idea what this hardware is actually doing, so this is being pulled out of a hat, but I'd expect something like "Some boards swap the polarity of the P/N pins, use this property to indicate this to software". > + type: boolean The type here should be flag. Cheers, Conor. > + > ports: > $ref: /schemas/graph.yaml#/properties/ports > > -- > 2.44.0 >
signature.asc
Description: PGP signature
